#21
|
||||
|
||||
Centuri Little Joe II - Instructions, Face Card, Partial Chrome
Ok, here is what I have at this point on the Centuri Little Joe II 1/100 scans. These are not from a complete kit; rather, they are what I got some years ago in a batch of old Centuri and Estes instruction sheets, most from the late 60s, very early 70s.
Attached are as follows: * Kit face card * All instruction sheets * Decal for capsule and escape tower * Metallic chrome wrap portions for the fins Once I open one of my kits, I'll have the scan of the full body wrapper and of the fin stock. Not sure when that will be though. Earl
__________________
Earl L. Cagle, Jr. NAR# 29523 TRA# 962 SAM# 73 Owner/Producer Point 39 Productions Rocket-Brained Since 1970 |
#22
|
|||
|
|||
Thank you, Earl!
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
#23
|
||||
|
||||
Related Centuri Kit
Some years back (around 2004 or 2005 I think) I put one of my unopened Centuri UFO Invader kit on the auction block of a rocket forum (that no longer exists, can't remember the name) as I was needing some extra cash at the time. I put the starting bid of the kit at $11.50, which was close to the last published price that I could remember for that kit.
The bidding period was about four days before ending. Bidding was mostly between two interested fellows that went back and forth over those four days. By the time the bidding was over, the winning bid was almost $100 (plus shipping).
__________________
Dave, NAR # 21853 SR. |
#24
|
||||
|
||||
Does anyone know what body tube will work as a replacement for the escape tower rocket on Estes 1/45 Little Joe II?
thanks
__________________
======================= If the Sky is the Limit, then, why is there Footsteps on the Moon? ======================= |
#25
|
||||
|
||||
It is just slightly over ST-5/BT5 sized.
I don't know if a BT6 exists or not....
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#26
|
||||
|
||||
It should be 0.577" in diameter. The real thing is 26" so multiply that by 1/45.
The part number is 031948. I'm at work so I can't tell you if they used a BT-5 (o.d. .541) or if they have a custom diameter for it.
__________________
I love sanding. |
#27
|
||||
|
||||
It definitely is NOT a BT-5/ST-5. I checked mine. A 13mm engine has about 1mm clearance in it around the entire circumference of the motor.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#28
|
||||
|
||||
http://www.erockets.biz/semroc-body-tube-6-12-0-long/
At 0.620" it would be bigger than scale, but possibly peeled. I have used ST-6 for duration birds as a bit bigger than a BT-5, but less than a BT-20. I peel those from the inside. Chas
__________________
Charles Russell, MSgt,USAF (ret.) NAR 9790, Lvl 1 SAM "Balls Three" |
#29
|
||||
|
||||
Chas-
That sounds too big to me. The tube used in the kit definitely is not "peeled". Is there such a thing as a BT-5.5 ?
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#30
|
|||
|
|||
It's bigger than a BT-5, but smaller than an ST-6. A BT-5 will sleeve fit into the tower tube (see pic). I'm thinking it's a custom size. Not surprising since the main body tube at 3.42" is also a custom size.
__________________
I like the unusual, the off beat, the avant-garde. No 3/4 FNC for me! |
Thread Tools | Search this Thread |
Display Modes | |
|
|