Agreed. Craig and I have kicked around some possibilities, but I'd prefer to discuss them over the phone, instead of even using e-mail.

How are you for Saturday? Let me know directly.


Cheers,

__________________
Jay Goemmer
"Centuri Guy"/"Tau Zero"
YORF Member 28
Semroc SAM #0029
NAR 86131


"I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. "

--Bill Eichelberger, 02/22/2022


“Centuri fret buzz in an updated form.”
Bill “Wallyum” Eichelberger re: Estes Flutter-By
03 Sept 2014

Sounds good!

__________________
Carl McLawhorn
NAR#4717 L2
semroc.com

No, we all want a comfy toilet seat, but we'll take a well balanced Tau Zero.

In case I didn't mention it previously, I'd like to be on both lists please.

__________________
Bill Eichelberger
NAR 79563

http://wallyum.blogspot.com/

I miss being SAM 0058

Build floor: Centuri Mini Dactyl Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle

In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II Semroc Cyber III

Ready to fly: Estes - Solar Sailer II Semroc - Earmark, Groonie Der V 1/2

Carl,

I'd also like the opportunity to speak over the phone with you. I'm likewise available on Saturdays, but after 3 PM Central; Saturday mornings are already committed to other duties.

Like Jay said, we've discussed some possibilities; I've even thought about a few additional things that might interest you. One day we need to set up a NetMeeting voice-and-video conference so we can all crack our monitors...

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635

(counting) Me, Bill, Craig, Andrew Scott down under. That's four. Oh yeah, and I built the prototype for Carl.

My math skills must be really bad tonight. So I'm off to bed.


Cheers,

__________________
Jay Goemmer
"Centuri Guy"/"Tau Zero"
YORF Member 28
Semroc SAM #0029
NAR 86131


"I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. "

--Bill Eichelberger, 02/22/2022


“Centuri fret buzz in an updated form.”
Bill “Wallyum” Eichelberger re: Estes Flutter-By
03 Sept 2014

I've built two, and I thought there might have been one other soul attempting the project; my math ain't what it used to be, either. That's why I use a computer; I can't think that straight...

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635

Last night and tonight, I could have used a pair of hunter's socks...

If you're reading this message, I think you're already on the second list -- there's the general YORF where everyone begs and pleads; and then there's this YORF, which is by special invitation and where you can drool with respect...

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635

Since my drawing skills are much closer to excrement than Napoleon Dynamite's , I'm afraid I'm going to have to resort to shooting photos instead.

Now all I need is a hand model.

Or a block of styrofoam, some toothpicks, and a roll of blue painter's tape.


--Jay

__________________
Jay Goemmer
"Centuri Guy"/"Tau Zero"
YORF Member 28
Semroc SAM #0029
NAR 86131


"I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. "

--Bill Eichelberger, 02/22/2022


“Centuri fret buzz in an updated form.”
Bill “Wallyum” Eichelberger re: Estes Flutter-By
03 Sept 2014

Jay, have you tried using Rocksim to create the images you need for the instruction pages? I have always thought it might be possible. I also wonder if the Rocksim Image files would transfer into a publisher program?

James Pierson
NAR# 77907

Save the images through RockSim's "Export 3D Image" menu option, and make the image a JPG. Fill the window with your image before saving; when you insert the image into Publisher, you can go into the properties of the image and scale it back down there.

I have been creating a special "exploded" file for getting individual pieces of the model, hiding various pieces that I don't need to see and rotating / zooming the ones I do. Works well enough...

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635