Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Semroc > SAM - Semroc Astronautic Modeler Team
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #11  
Old 05-22-2012, 10:31 AM
Chas Russell's Avatar
Chas Russell Chas Russell is offline
Retired Missile Technician
 
Join Date: Mar 2005
Location: Fort Worth, TX
Posts: 904
Default

Starship Excaliber (Estes DOM?)
Nike-Tomahawk
Maxi-Micron
ThunderStorm (have to complete the series)
Omega
__________________
Charles Russell, MSgt,USAF (ret.)
NAR 9790, Lvl 1
SAM "Balls Three"
Reply With Quote
  #12  
Old 05-22-2012, 11:02 AM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Michigan
Posts: 9,532
Default

In order:

Egg Crate
MMMMMMidget !!!!
Nike Tomahawk
Starlight
Nighthawk


I would actually skip the Omega over all those as that is one of the simplest kits to clone just by slapping a 'parts kit' together of a BNC60AH Nose cone, 3 sections of BT60, a couple stage couplers, a BT60 nose block, a couple BT50 to BT60 motor mounts, some fin stock and a recovery system.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!
No DIRECT and MEASURABLE Harm=NO Foul advocate

If you are NOT FLYING LOW in the left lane, you need to GET THE #$&@ OUT of it !

Yes, there is such a thing as NORMAL
, if you have to ask, you probably aren't
!
Reply With Quote
  #13  
Old 05-22-2012, 12:00 PM
Doug Sams's Avatar
Doug Sams Doug Sams is offline
Old Far...er...Rocketeer
 
Join Date: Mar 2005
Location: Plano, TX resident since 1998.
Posts: 3,962
Default

Quote:
Originally Posted by ghrocketman
In order:

MMMMMMidget !!!!
Well, of course, that one always gets my vote

What I like about it is that it can be done several ways. The stock Mini Brute EST-0840 would use stock mini (T) motors. The earlier, stock K-40 would use T motors with 18mm adaptors (or can be built with 13mm motor tubes).

BT-55 and BT-60 upscales work great with stock 18 and 24mm motors, respectively. These require somewhat non-scale changes to the length of the booster sections (as I recall) but it's not not noticeable, the changes are quite minor.

That said, the corps of Midget enthusiasts is quite small, so I question whether there's enough market to justify any of these.

Doug

.
__________________
YORF member #11
Reply With Quote
  #14  
Old 05-22-2012, 12:14 PM
Bob H's Avatar
Bob H Bob H is offline
Master Modeler
 
Join Date: Mar 2005
Location: Douglas, MA
Posts: 556
Default

I am not going to say Starship Excalibur since I just finished one last week.

The laser cut fins were nice though.

USS America
AIM-54C Phoenix 1/10
Starship Correy
Midget

I would prefer the Midget be the original size. I wouldn't mind using adapters to make "mini motors" into "shorty motors" but that's probably just me.
__________________
Bob Harrington
NAR #62740 L1
AMA #46042
CMASS & RIMRA Member
Reply With Quote
  #15  
Old 05-22-2012, 12:37 PM
Eagle3's Avatar
Eagle3 Eagle3 is offline
Administrator
 
Join Date: Jun 2004
Location: Manchester,MI
Posts: 1,250
Default

USS America
Starship Excalibur
Starlight
Nike-Tomahawk 1/10
Starship Correy
__________________
Quando Omni Flunkus Moritati
Reply With Quote
  #16  
Old 05-22-2012, 01:18 PM
foamy's Avatar
foamy foamy is offline
Master Modeler
 
Join Date: Jan 2011
Location: The Land of Pleasant Living
Posts: 1,109
Default

Nike-Tomahawk 1/10
Starlight
Thunderstorm
Maxi Micron
__________________
Retro-grouch
Reply With Quote
  #17  
Old 05-22-2012, 01:18 PM
Carl@Semroc's Avatar
Carl@Semroc Carl@Semroc is offline
Junior ??? Rocketeer
 
Join Date: Mar 2005
Location: Knightdale, NC
Posts: 1,470
Default

Latest votes:

9 Omega
8 USS America
7 Starship Excalibur
7 Nike-Tomahawk 1/10
6 Egg Crate
6 AIM-54C Phoenix 1/10
7 Starlight
5 Starship Correy
3 Nighthawk
2 Midget
2 ThunderStorm
2 Maxi-Micron
0 Arcon 1/4

Notes:
Omega comes with balsa "Cineroc" payload section. We will probably offer the 60AH payload section as a "free kit" to SAM's that purchase the Omega. Another reason for the Omega is the new Estes E12 engines! It has slotted tubes for straight flights if a camera is installed.

We have kept pushing the USS America out because of the cost. Still not sure if it would sell at $45. There is a lot of stuff in it. AND it really needs more than a standard Estes C6-3 to fly it. It was originally designed around the Centuri C5 with 50% more initial thrust. That makes it a 24mm version for now using C11 and D12 (maybe E12!)

The Phoenix in 1/10 scale was fun to build. Combination of 3/16" balsa for root of long vanes and basswood for the vanes and fins makes it look scale. It will have 1/2 oz clay weight in nose. The slowdown for it is the special stencil font to match the original. I started editing a similar font, but there are many letters and numbers left to do.

The holdback on the Nike-Tomahawk is the built-up fins from basswood struts and card stock. The result looks good, but it makes it like the LJ II and S1B fins which some don't like.

The "cabin" and split tubes on the SS Excalibur have been a challenge to produce. I wanted all the slotting and cuts to be done by laser, but it looks like the builder still must split the BT-5 lengthwise.

The laser-cut cardstock at the base of the SS Correy may be challenging to some.

We will probably re-release the Nighthawk as an xKit. Scott has a better drawing now. We dropped it several years ago when Estes announced it as one of the Classic Series, but I was told they no longer had any plans for it.

Thanks for all the input. It really helps make some tough decisions.
__________________
Carl McLawhorn
NAR#4717 L2
semroc.com
Reply With Quote
  #18  
Old 05-22-2012, 07:42 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default

Carl wrote:
Quote:
Originally Posted by Carl@SEMROC
The "cabin" and split tubes on the SS Excalibur have been a challenge to produce. I wanted all the slotting and cuts to be done by laser, but it looks like the builder still must split the BT-5 lengthwise.


What about using the laser to cut down the sides of the tubes like you do the fins in a sheet? Leave some connecting tabs for the builder to finish cutting. That would keep the tubes relatively round during shipping, and would make the edges about as straight as possible. One addition to the kit might be some "new moons" of 0.07" matteboard to act as internal bulkheads (to help the tubes hold their shape).
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #19  
Old 05-22-2012, 07:48 PM
stefanj stefanj is offline
Master Modeler
 
Join Date: Mar 2005
Location: Hillsboro, OR
Posts: 2,620
Default

How big is the Maxi Micron? Just curious . .

I'm not going to vote, because I am SO. TOTALLY. OVERLOADED. with unbuilt kits that I can't in good faith throw off the stats on "what seems most cool" rather than what I'd buy.

(I am likely to buy a bunch of Semroc kits as give-aways . . . and it can't hurt to keep and build one Sprite, right? )
__________________
NAR #27085 - Oregon Rocketry - SAM
Reply With Quote
  #20  
Old 05-22-2012, 07:53 PM
conleyt's Avatar
conleyt conleyt is offline
Dazed and Confused!
 
Join Date: Apr 2006
Location: Indianapolis, IN
Posts: 184
Default

USS America
ThunderStorm
Starship Correy
Starlight
Arcon 1/4
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 06:30 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe 1998-2020