#21
|
|||
|
|||
Quote:
I don't remember it being covered in the Apogee Newsletter and I usually do read the articles that deal specifically with RockSim. I may have overlooked it though. I may email Tim and see if he can shed some light on this feature. I had an entry for an EMRR virtual rocket contest that had a transition and reverse transition close to the nose cone and remember not being able to figure out why the calculations were so far off. I wasn't aware of this feature at the time so I trashed the design and went another direction. .
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
#22
|
|||
|
|||
Quote:
Craig, I did get a little progress on the 24mm AV Booster tonight. Engine mount is finished and mounted with kevlar shock cord anchor and fins are cut and covered with label paper and edges sealed with CA. I would normally use a Semroc ST-13 baffle but I'm trying to get it built to paint this weekend since our next launch is on Nov. 17 and I want to fly it at least a few times. .
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates Last edited by snaquin : 11-05-2007 at 10:15 PM. |
#23
|
||||
|
||||
New Plan -- 24mm AstroVision Booster #2
Here's the second design for a 24mm "D" power booster for the AstroVision package. My goals were to create something that could get off the pad on a 36" rod, and pop-the-top with a moderate Dv. I think this design meets those goals. If it looks vaguely familiar, then understand that some designs just can't be improved upon, just adapted...
Length: 18.30" Diameter: 1.375" (AV base diameter) Fin Span: 3.34" Weight: 2.27 oz D12-7......1350'......Dv 18 FPS......36" x 3/16" launch rod (only needs 30") The flight from GL to deployment is 8.2 seconds.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#24
|
||||
|
||||
New Plan -- Snark
This one is a "Schoolyard Sounder".
Snark is a simple "Tau-styled" model with incredible performance on 13mm A3-4 motors. This is very likely going to be my next prototype! Length: 18.27" Diameter: 1.04" (BC-760) Fin Span: 2.42" Weight: 0.93 oz A3-4T......460'......Dv 5.5 FPS......36" standard rod Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#25
|
||||
|
||||
"*Dude!* That's TAU Snarky!"
Craig,
This one definitely looks very "Snarky!" (No Apogee Components reference intended! ) Quote:
(DUDE, WHERE'S MY CAR? VOICES) "*Dude.* -- *Sweet.*" Cheers, --Jay
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#26
|
|||
|
|||
New Design: Cap Ship
Now that is it 2008 look like we need to bring this thread back on top. Lately I have added all of the Semroc Classic tubes and balsa transitions to my database and my parts options have doubled. Still have yet to get around to the Centering Rings files. I also need to update alot of early designs using the Maximum Frontal Diameter and other necessary changes in the next year.
The bad news is that Tranquility 1 will need a slight redesign. Only found this out after it was built. There is a problem with the lower retaining cup that hold the pods. I use a 1/2 inch piece of ST-16 and the pods fit just fine, however there is no room for a streamer once they are wraped around the pods. The fix will be to change the ST-16 to an ST-18 and replace all the lower fins . This give enough room for the streamer and a little extra for easy deployment. This is called learning the hard way . Here is a ring fin design that I call the Cap Ship. It was inspired by a vintage cap toy that I saw on ebay. It uses 1 inch section of ST3030 which are about 3.6 iches in diameter. Enjoy and Thanks Again, JP Cap Ship (18mm) Launch guide length: 36.0000 In MOTOR.................MAX. ALTITUDE...........DEP. VELOCITY A8-3..................152.30348 Ft.............14.5008 ft/s B4-4..................382.48360 Ft..............5.1734 ft/s B6-4..................389.86549 Ft..............3.6389 ft/s C6-5..................867.97244 Ft..............1.8969 ft/s James Pierson NAR# 77907 |
#27
|
||||
|
||||
Design Count
As I continue working on the website update, I am watching the number of designs gradually inching upward as I 'discover' some additional designs posted on the forum that were somehow overlooked. So, I thought I'd share these numbers with you for encouragement...
In the PROVENS category, we have 413 designs, the most recent being James Pierson's Cap Ship. In the CONCEPTS category (designs that have either not been sufficiently debugged, or cannot be simulated with RockSim) we have 41 entries. This brings us up to 454 designs at the start of 2008. Can we make this number cross 500 before the end of the year? I think it's possible! Also remember, now that we're into the new year, the "Scrounged...2007" thread is closed for new posts. All new submissions need to be posted here in the Designers Studio. I'm looking forward to seeing what develops here!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#28
|
||||
|
||||
Laser Wolf -- Another mutated design
I did this one back in August, and sent it to Craig (so it may already count as a 2007 BARCLONE design) , but I unearthed it again this week. I sent propaganda to JP and BillE, but apparently I didn't share it with the rest of the forum until now.
From the Can't Leave Well Enough Alone Department, this is, "A collision between Wolverine #0861 and Laser Torpedo #1311 -- Upscaled to 1.68X." Any comments or suggestions (aside from, "So, tell us about these voices you hear in your head" ) are welcome. Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#29
|
||||
|
||||
Quote:
AKA "Laserene"... Be sure to look at those "launch guide lengths" in the sim sheets. Both the C11 and the D12 require 48" x 3/16" rods. The E9 takes 47 out of 48, so you need a 60" rod or tower. I still like the design. "She jus' needs more power, Capt'n..." ...And as for those voices, you might try a few generous doses of " PF Dark Side" and "AP Valid Path". (Now there's a combination of music: A Valid Path to the Dark Side...)
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#30
|
|||
|
|||
Laser Wolf on Diet
Looks great Jay, however after a closer look the Laser Wolf is a bit heavy as Craig has suggested. Its also way overstable. Both heavy and overstable are to blame for the take off speeds and launch rod length required.
Might concider the following: Change from Nylon to plastic chute (Nylon Heavy) Upper fins to 1/16" thickness Other fin to 3/32" thickness Reduce large lower fins size by 25% or so Reduce length of upper BT-60 Hope this is helpful, and don't worry, I have to do the design diet thing all the time with my freaky design. . James Pierson NAR# 77907 |
Thread Tools | Search this Thread |
Display Modes | |
|
|