Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > 3D Printing Asylum
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-24-2021, 10:25 AM
Jack Hydrazine Jack Hydrazine is offline
Craftsman
 
Join Date: May 2011
Posts: 146
Default 1515 Conformal Rail Button Backplate Mount

This is a continuation from my 1010 Conformal Rail Button Backplate Mount design that has been upgraded to 1515 rail buttons for use on 1515 launch rails. It's purpose is to provide a way to mount the rail button nut so that it does not interfere with the operation of the recovery system.

This place where the nut sits is designed to fit the 1/4"-20 nut.

There are two designs:
A) This will fit 6 inch airframe tubing that has an ID of 6.0 inches (152.4mm).
B) This will fit 6 inch coupler tubing that has an ID of 5.775 inches (146.69mm)
https://www.thingiverse.com/thing:4735328

If you need a rail button take a look at a look at a couple of my designs below.

1515 Aero Rail Button Conformal 3.1 inch (79mm)
https://www.thingiverse.com/thing:4606668

1515 Aero Rail Button Conformal (3.1 inch/76mm tubing) w/Standoff
https://www.thingiverse.com/thing:4595270

1010 Conformal Rail Button Backplate Mount
https://www.thingiverse.com/thing:3467549
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 11:53 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe 1998-2021