#1
|
|||
|
|||
Crayon Rocket BT-80
This 3D modeling project will allow you to make and fly a Crayon Rocket. It was inspired by John Coker's webpage of his design, build, and flight of a box of crayon rockets.
http://www.jcrocket.com/crayons.shtml You can see a flight video of them here. https://www.youtube.com/watch?v=-dU...annel=JohnCoker These nose cones, tail ends, and fin cans are designed to fit Estes BT-80 airframe tubes. https://www.thingiverse.com/thing:4974346 |
#2
|
||||
|
||||
Jack!
This is awesome! Thank you so much for sharing with us! I also want to thank you so very much for all your hard work and time it took on the the 3D printer parts and fin cans to design these for us! I will get right on it and post some pics on your thingiverse site of the completed rocket and parts. I'm working on a BT60 version. So a down scale. I will also post the scale factor to help others once I get that fine tuned on thingiverse to. Thank you so very much again!
__________________
======================= If the Sky is the Limit, then, why is there Footsteps on the Moon? ======================= Last edited by Flash : 09-25-2021 at 08:58 PM. |
#3
|
|||
|
|||
You are quite welcome!
Have fun printing and flying this model! |
Thread Tools | Search this Thread |
Display Modes | |
|
|