#11
|
||||
|
||||
I just redid the decals in blue.
I still have the black and red available
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#12
|
|||
|
|||
I liked the MASA article on the 1.8 upscale with a BT-60 BT. I think I'd like to make two: one with blue graphics and one with red. What's the BT size for the tube fins?
|
#13
|
||||
|
||||
Quote:
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#14
|
|||
|
|||
I checked Semroc for body tubes and nose cones. The longest BT is about 18" and the upscale length is 23". Do I need to get a coupler and another BT to get the extra inches or is there a different BT I should be looking for.
I wasn't sure about the nose cone either. The BNC-60RL is the right length (8.4") but the shape doesn't look quite the same. Is this right? Would Semroc know what I would need for the 1.8 upscale? |
#15
|
||||
|
||||
Quote:
BMS and erockets http://www.erockets.biz/ have 34" lengths of BT-56.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#16
|
|||
|
|||
So if I get the BT-56, I should get some short lengths too. What about the nose cone? I couldn't really tell which nose cone from Semroc is closest to the original. Is there a model number or description I should be looking for?
The Excelsior decals are for BT-60s. Would there be any issues with the BT-56s? (I'm mostly thinking about the decal that wraps around the BT.) |
#17
|
||||
|
||||
Quote:
If you email me I can scale the decals to fit a BT-56. If there are more requests I'll post them on my web site. Also if you email me your address I can send you a bunch of short BT-56's. I have a real big box of short BT-56's!
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#18
|
|||
|
|||
Any idea for the nose cone that most closely matches the original for the BT-56?
|
#19
|
||||
|
||||
Centuri Guy's "close call"
Quote:
Original PNC was 4.6" long. ST-8 to ST-13 (BT-56) is roughly 1.48X upscale. 4.6" x 1.48 = 6.8" or so. Take a Semroc BC-1367, round the tip slightly, and only Bill E. (Wallyum) and I will know the difference: http://www.semroc.com/Store/Scripts...?idproduct=2465 Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#20
|
|||
|
|||
Thanks to everyone! Now I have to get my parts list together and do some ordering!
(I think one in red lettering and another in blue...) I'm going for the 24mm engine mount for D and E engines. |
Thread Tools | Search this Thread |
Display Modes | |
|
|