#1
|
||||
|
||||
What to build now?
I have:
- a 14" length of BT-80 - a Big Daddy body tube (about 9" long, with precut fin slots) - a BT-80 sized tube coupler - a pair of centering rings for a 3x 18 mm cluster - a bunch of 18 mm motor tubes - a bunch of motor hooks - a bunch of motor blocks - an 18" BT-60 tube - a short rounded PNC-60 nose cone - other random parts and pieces - a 4" wide by about 24" long piece of 1/8" balsa Any suggestions? (crossposted to TRF, btw)
__________________
John Thro, NAR #84553 SR I was too old when I started! Now I'll *never* become a BAR! |
#2
|
||||
|
||||
Junkpile Challenger
Quote:
Ahem...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
||||
|
||||
Quote:
Sheesh, I said Big Daddy but meant Fat Boy, which actually uses a BT-80 tube.
__________________
John Thro, NAR #84553 SR I was too old when I started! Now I'll *never* become a BAR! |
Thread Tools | Search this Thread |
Display Modes | |
|
|