If it goes for under $100, you could have a really nice complete set for under $200.

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't !
Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.

This thread has over 54,000 views! Must be a lot of X-Acto collectors out there.

__________________
Scott D. Hansen
Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe!
Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies!
Ye Olde Rocket Forum
WOOSH NAR Section #558

50,000 of them are probably Earl and I.

Would really like to find the #1G and #2G retractable knife handles that appear in the 1960 catalog.
By the 1966 Catalog, they were gone.

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't !
Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.

Decent price on an Xacto #89 set. Looks to be missing a couple interchangeable heads for the hammer, a couple C clamps, and some of the small drill chucks for the little aluminum ‘finger’ drill that is at the left bottom of the set. Asking $79, plus shipping.

Not my listing nor do I know the lister.

Link: https://www.ebay.com/itm/1156859640...ABk9SR-6iuYi-YQ

Earl

__________________
Earl L. Cagle, Jr.
NAR# 29523
TRA# 962
SAM# 73
Owner/Producer
Point 39 Productions

Rocket-Brained Since 1970

This one is almost too good to pass up at $79, but since I have two of them, I'll leave it for someone else to enjoy.
If it was a #88N or #98 I'd grab it.

Still looking for the following handles : #6L, #5L, and retractables #2G and #1G.

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't !
Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.