#11
|
||||
|
||||
Centuri "Chuter-Two" 1.48X UPSCALE!
Quote:
I left the fin thickness at 3/32" balsa, and I also used thinner fin reinforcements (1/16" instead of 3/32"), and put them on *both* sides of the fins. (As with my first attempt at this design, there's only one parachute in this one. ) The performances (and deployment velocities) on the standard motors are *much* better (i.e., kinder and gentler) on this 1.48X upscale than on the original version. And I have to issue my usual parts disclaimer: The BC-1371 nose cone is *not* available from Semroc. At least not *yet.* (For those who *insist* on knowing, the ST-13118 is 11.75" long.) .
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 Last edited by CenturiGuy : 10-31-2008 at 10:38 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|