#1
|
||||
|
||||
EnerJet Set
Comrades:
While data-mining in the archives here, I found an underlying current of Enerjet fanatics building the Nike-Ram, 1340 and various Aero-Darts. Most of these threads are at least 6 years and in some cases as much as 13 years old. I came from a different direction building a Pterodactyl first. But I have been bitten by the bug and will be completing a 1340 based on Eliminator parts and a Nike-Ram from Semroc parts. I'd build more, but I only have the one fin can. So I have questions: 1) Was the BT-56/ST-13 .1" coupler ever re-released? 2) On the 1340, is the .5" of tubing protruding below the fin can body tube or engine tube? 3) Are EnerJet decals available in vinyl? 4) Is it blasphemous to build them as single tubes without the payload bay? 5) The paint jobs on all the Enerjets seem very alike, especially the 1340 and the Nike-Ram.
__________________
NAR 79743 NARTrek Silver I miss being SAM 062 Awaiting First Launch: Too numerous to count Finishing: Zooch Saturn V; Alway/Nau BioArcas; Estes Expedition; TLP Standard Repair/Rescue: Cherokee-D (2); Centuri Nike-Smoke; MX-774 On the Bench: 2650; Dream Stage: 1/39.37 R-7 Last edited by MarkB. : 04-22-2019 at 09:17 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|