#1
|
||||
|
||||
Revised Design - Lirpa (2007)
This is a design that I started in 2007, with a not-so-clean rendering created with an earlier version of RockSim. I began a RS9 version as soon as I got the package, but it had some simulator errors that made me set it aside for awhile.
The model is an offset-centerline style, with a ducted ejection port to the forward fuselage. The original design used 18mm C6-5s, but this version seems to work just a little better using 24mm C11-5's. Length: 37.50" Diameter: 1.34" (ST-13) Fin Span: 11.32" Weight: 2.61 oz C11-5......~570'......Dv ~19 FPS......48" x 3/16" launch rod Patterns are available for the fins and the offset centering rings (next post). Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#2
|
||||
|
||||
New Patterns -- Lirpa (2007)
Two fin sheets and one centering ring sheet.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|