#91
|
|||
|
|||
LeeR
Quote:
Thanks Lee, I am glad you like what we have here. The Choice to build, fly or design seems to be a simple one with me lately. If I have the parts, I build, if not I design . Here is another design I call the Frontier Explorer. I got the illustration from an G. Harry Stine book cover I found on e-bay. The book was called Man and the Space Frontier. Picture too large to post. It is not anything scale, I just gave it a good guess and some major tweeking for stability. Thanks Again and Enjoy, JP James Pierson NAR# 77907 |
#92
|
||||
|
||||
Some new versions of an old kludge...
This set of designs is based on the 3" components just announced in the "Vendors" thread by Mercury Engineering. Their 3" ogive nose cone looked interesting...
I call this set the Big Baby Cherokee D3Mx, where "x" represents the number of 24mm motor tubes in the model. General specs for all three models: Length: 28.0" Diameter" 3.0" Fin Span: 12.08" [ADDENDUM: RockSim plugged in a setting of "solid" instead of "hollow" for the nose cone. I didn't catch it until the files were sent. It does change the flight specs quite a bit... ] D3M1 specs: Weight: 11.38 oz (no ballast required) F21W-6......1300'......Dv 1 FPS......48" x 3/16" rod D3M2 specs: Weight: 12.03 oz (0.5 oz ballast in tip of NC required) (2) E30-7.......1710'......Dv 24 FPS......36" x 3/16" rod D3M3 specs: Weight: 14.38 oz (3 oz ballast required in tip of NC) (3) F21W-8......3000'......Dv 34 FPS......36" x 3/16" rod (3) F72-10......3575'......Dv 15 FPS......36" x 3/16" rod (3) F32-10......3945'......Dv 7 FPS.......36" x 3/16" rod Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 Last edited by CPMcGraw : 07-15-2007 at 11:38 AM. Reason: Wrong description of NC |
#93
|
|||
|
|||
More Parts!
Nice designs Craig, and I wiil be sure to add the NC to my database. A guy can always use more parts .
James Pierson NAR# 77907 |
#94
|
||||
|
||||
New Plan -- BarJet 3524
OK, here's one that's a little more serious in nature. Using those Mercury Engineering components, I applied a full measure of force in motors to reach a full mile in altitude. It jumps off the pad and reaches stable flight velocity in 13", so a minimum 36" x 1/4" rod is required. A 48" x 1/4" rod would give it more support, though.
Length: 61.875" Diameter: 3.0" Fin Span: 12.0" Weight: 19.77 oz Parachute: 36" Rip-Stop Nylon (5) G55-10......5000'......Dv 23 FPS......36" x 1/4" rod (5) G37-10......5321'......Dv 20 FPS......36" x 1/4" rod More foo for thought... Enjoy! PS -- Whoever builds this bird owes us all some flight shots!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#95
|
||||
|
||||
Quote:
My cements eggzactly... Seriously, though, having a manufacturer of larger components opens up a multitude of possibilities... Imagine, for example, if we had the SEMROC BC-760 nose cone in 3" diameter hollow poly? My head is spinning about what the Andromeda would look like at that scale... Let's see... 3" divided by 0.736" equals about 4.08. Now, the current version of the Andromeda is 29.25", multiplied by 4.08 gives us 119.34". The original fin span is 5.86", multiplied by 4.08 would be 23.90" across. Sounds like I need to work up a RockSim on this bad boy...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#96
|
||||
|
||||
Quote:
Hmm, makes me wonder if Vern got the idea for the Drifter from this design. Except that the Drifter was single BT, its fins and tailcone have a very similar look.
__________________
Lee Reep NAR 55948 Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor In the Paint Shop: Nothing! Too cold! Launch-Ready: Farside-X, Maxi Honest John, Super Scamp |
#97
|
|||
|
|||
LeeR
Quote:
If you are still wondering, check this out and tell me what classic kit this Vintage Sci-Fi magazine cover of Startling Stories has inspired? One of my most favorite kits . James Pierson NAR# 77907 |
#98
|
|||
|
|||
Quote:
Well let's see now could it be the Centuri Starfight from Buck Rogers or the Blackhawk from estes. The latter of I am just waiting on parts for the up scale kits Mark
__________________
Mark & Loretta NAR#'s 85852 L1 @ NSL 2006, 85930 L1 @ NARAM 48 NHRC Club Member DARS Club Member Just Lookin' To Have Some FUN !!! Hawks Hobby |
#99
|
|||
|
|||
Upscale Blackhawk! Cool!
Mark
Quote:
Yeah, Blackhawk, that's the one I was thinkin of . An upscale of the Blackhawk is a must buy in my book. Do you have a release date yet Mark? Advance Orders?? James Pierson NAR# 77907 |
#100
|
|||
|
|||
Quote:
Hoping to have it done and ready for release with in the next 2 months. Not sure the price yet. Anyone that wants to put in a advanced order just send me a email or PM and I'll put you on a list to have 1st option when the kit is done. Oh ya and James I have put you on the list. Loretta sales@hawkshobby.com |
Thread Tools | Search this Thread |
Display Modes | |
|
|