#1
|
||||
|
||||
New Design -- Rigellian Scout
This design uses a special nose cone that is available from SEMROC, but which may not be listed on the website. I thought it might be something different enough to try using it again.
For reference, the PPB is part of the turning... Specs: Length: 23.02" Diameter: 1.556" (PPB) Fin Span: 3.96" Weight: 1.55 oz A8-3......159'......Dv 14 FPS......36" x 1/8" rod (needs 33" of this, so be careful!) B4-4......368'......Dv 12 FPS......36" x 1/8" rod B6-4......372'......Dv 9 FPS.......36" x 1/8" rod C6-5......767'......Dv 18 FPS......36" x 1/8" rod Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#2
|
||||
|
||||
Now that's a really cool-looking rocket! Maybe when I get done with the other 7 or 8 rockets I have in line to build I'll look at it :-)
I'm looking forward to getting some kits from Sirius Rocketry. They've got some really great designs.
__________________
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Dale Marshall, San Antonio Texas NAR #90990 Semroc SAM #083 BAR Since 2008 Enjoying model rocketry since 1977. The Spotted Dragon -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- |
#3
|
|||
|
|||
Quote:
only 7 ot 8 ? sounds like we need to work on you more ~ AL |
#4
|
||||
|
||||
Well I just picked up a whole bunch of parts and balsa. So in addition to the kits, I now have a large (to me) box of tubes and other parts. Scratch-building here we come :-)
__________________
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Dale Marshall, San Antonio Texas NAR #90990 Semroc SAM #083 BAR Since 2008 Enjoying model rocketry since 1977. The Spotted Dragon -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- |
#5
|
||||
|
||||
Folks,
I need to make a quick update to this design. In the original post, I said that SEMROC had this cone available, just not posted. My goof! I had in mind another cone of a similar shape cut for the ST-11 series. Sorry, Carl! If this cone were available, it would likely have a designation of BC-1076SP... Adjusted specs: Length: 23.25" Diameter: 1.566" (PPB) Fin Span: 3.96" Weight: 1.58 oz A8-3......157'......Dv 15 FPS B4-4......365'......Dv 12 FPS B6-4......370'......Dv 9 FPS C6-5......765'......Dv 18 FPS Revised files below.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|