#1
|
||||
|
||||
Semroc logo rocket kit?
Hello All,
I was just looking at the "rocket-transecting-sign" Semroc logo on the Semroc web site www.semroc.com when a thought came to me: Since Semroc produces a kit of the "Launch Missile" (from the logo [or is it called the "masthead?"] on the front cover of each issue of "Launch" magazine), how about if they produced a kit of the rocket that appears in their own logo? From the look of it, an Astro-1/Astrobee 350 nose cone with a 1.04" diameter ST-10 body tube would be a good "fit." What d'y'all think?
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR |
#2
|
||||
|
||||
The logo rocket is unremarkable when not in high perspective. It is a BT-20 13" long with sort of Explorer fins.
__________________
Carl McLawhorn NAR#4717 L2 semroc.com |
#3
|
||||
|
||||
Quote:
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR |
#4
|
||||
|
||||
Quote:
Doug .
__________________
YORF member #11 |
#5
|
||||
|
||||
I agree with Jason ... There's beauty in simplicity. I'm thinking "Carlisle mini"...
__________________
Bernard Cawley NAR 89040 L1 - Life Member SAM 0061 AMA 42160 KG7AIE |
#6
|
||||
|
||||
SEMROC LOGO Rocket
Here's a quick interpretation of that design. It may be a little longer than what Carl mentioned, but I think I got the proportions right. I worked up the graphics in Corel DRAW.
Length: 15.25" Diameter: 0.736" (BT-20) Fin Span: 2.74" Weight: 0.4 oz 1/4 A3-3T......134'......Dv 12 FPS 1/2 A3-4T......318'......Dv 9 FPS A3-4T..........640'......Dv 20 FPS This model doesn't need full-tilt 18mm engines. 13mm A3's are plenty enough to lose it. Enjoy!
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#7
|
||||
|
||||
It is deceptive. The fins are somewhat smaller and the nose cone is an ogive 3.0" long (which we don't have right now.)
It was tweaked to get the right look in perspective mode. Even the decal was stretched to make it look right. I agree on the 13mm engines. BT-20 and ST-7 models are getting too small for 18mm engines in the fields that are still available around here. Thanks Craig. You are fast with the Rocksim and Corel.
__________________
Carl McLawhorn NAR#4717 L2 semroc.com |
#8
|
||||
|
||||
Well, let us know when the nose cone and the laser-cut fin set is available and we'll take it from there <GD&R>! For that matter, the fins are simple - we can cut 'em. And a 2.95 inch ogive (BNC-20G4) oughta be plenty close enough!
Here's an OpenRocket file with a "T" motor mount in it, based on the .rkt file Carl posted. An "A" is plenty. Fins changed to rounded edges, nose cone changed to 2.95 inch BNC-20G4, along with the mini motor mount with hook.
__________________
Bernard Cawley NAR 89040 L1 - Life Member SAM 0061 AMA 42160 KG7AIE Last edited by BEC : 01-25-2011 at 02:13 PM. |
#9
|
||||
|
||||
Fin Sheet Pattern
So, here's the fin sheet for Carl's 'death ray'...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#10
|
||||
|
||||
...And here's the decal...
Three versions, one each for CDR 10 and 12, and one PNG...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
Thread Tools | Search this Thread |
Display Modes | |
|
|