#1
|
|||
|
|||
EagleWorks Plans
Here is the first of my THOY designs converted to Rocksim. It reaches a respectable 1,600' with a C6/C6 combo.
More to follow. Craig, I'll work on a single sheet plan for BARCLONE.
__________________
Quando Omni Flunkus Moritati |
#2
|
||||
|
||||
Quote:
Excellent! Sleek, sharp, not complicated, but offering respectable performance. Would you consider this a Skill Level 1 or 2?
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
|||
|
|||
Thanks Craig. I should have the Cluros ready to upload soon.
Construction-wise it's a one, but since it's a multistage I would probably label it a skill level two.
__________________
Quando Omni Flunkus Moritati |
#4
|
|||
|
|||
Here's the second two-stager I designed for THOY. The original had a 16" upper stage tube length. I upped it to 18" for a little added stability, though I never had a problem with the prototypes.
I plan to recreate the decals for all of these kist as well.
__________________
Quando Omni Flunkus Moritati |
#5
|
|||
|
|||
Cool. Thanks for putting these together for us, Buzz!
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
#6
|
|||
|
|||
This was a design from my HS days. Sent it in to Estes for the DOM and got a runner-up award.
__________________
Quando Omni Flunkus Moritati |
#7
|
||||
|
||||
Quote:
Another good-looking design. It's really interesting how relatively simple shapes and paint patterns, with not too much added detail but a little more than a 3FNC or 4FNC, can actually stand out more strikingly than one with gobs of details and complex patterns. Did you prototype this one back then?
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#8
|
|||
|
|||
Thanks Craig. I did prototype it, but don't have the original. I built a new one last year using spare parts lying around. I added balsa to the side of the fin tips and root area just to give a little more of a different look. I plan on flying it this weekend hopefully with a coat of primer at least. *LOL*
http://forums.rocketshoppe.com/atta...ttachmentid=114
__________________
Quando Omni Flunkus Moritati |
Thread Tools | Search this Thread |
Display Modes | |
|
|