#1
|
|||
|
|||
American Rocketeer Uni-Bird
Anyone ever seen or built one of these? Just wondering about the paint scheme. Orange and white maybe?
https://plans.rocketshoppe.com/pubs...72_Uni-Bird.pdf
__________________
Up next: Under construction: Under repair: In finishing: Centuri Sabre clone In primer: In paint: Ready for decals: Bill Cooke NAR #31312 TRA #19705 SAM #0001 Huntsville, AL My rocket blog My rocket fleet |
#2
|
||||
|
||||
Funny, I was just looking at this plan night before last. I got an extra copy of that American Rocketeer issue in a group of other Centuri ephemera a week or so ago. I had not looked at that particular issue in a few years, so I was looking it over again. I always thought that use of the paper reducers to flush-mount the first stage into the base of the main vehicle to be fairly interesting.
It would make an interesting build and flight vehicle...but I'm terrible at picking colors (color blind). Earl
__________________
Earl L. Cagle, Jr. NAR# 29523 TRA# 962 SAM# 73 Owner/Producer Point 39 Productions Rocket-Brained Since 1970 |
#3
|
||||
|
||||
The single asymmetrical streamer tube is vindicated with all the modern launch vehicles like the Atlas V using a single strap-on when two or more aren't needed.
Paint... It reminds me of the Centuri Stellar, so you could go with that paint scheme...basically white with black decals. Lots of kids in that era just painted a kit with whatever color they had, tip to tail. Decals were usually black. I've seen lots of solid yellow or solid red/orange rockets with black decals that to me look vintage 60's, early 70's. In fact, there has been a few pics posted of a closet full of rockets the last couple of days that had a few rockets painted that way. The B&W photo looks like the NC is white and the body looks like it may be a medium color of some sort. Looks like the decals/striping are black and white. Red always works with B&W (der Red Max), so does richer yellows and oranges. If you are thinking of sounding rockets, a steel blue, grey, or OD body would go well.
__________________
I love sanding. Last edited by tbzep : 08-19-2020 at 08:58 AM. |
#4
|
|||
|
|||
Yesterday I was cleaning out the car that we're giving to a local charity. I found a binder that I stored potential projects in, and this one was one that I'd never gotten to. I threw a bunch away because I'd built them in the years since.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc Starfighter Scorpion Centuri Mini Dactyl Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II, Xarconian Cruiser Semroc Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark |
#5
|
|||
|
|||
Interesting model! I'd never heard of it before.
Remember to visit your Centuri dealer for that PNC-167. Picturing an old hobby shop owner listening patiently as you jokingly ask for one. He smiles, reaches for a orange and black striped box on the top of a high shelf, blows off a half inch of dust, and hands you a mint condition Nike Smoke cone. (And when you go back, realizing your should have bought more than one of those rare cones, you discover an empty storefront. "Albert's Hobbies? Why, they closed fifteen years ago.")
__________________
NAR #27085 - Oregon Rocketry - SAM |
#6
|
||||
|
||||
Quote:
I might could semi-scale it with nose cone from one of my many squirreled away Nike-Smokes. If all else fails, I could spin up the old lathe. Haven't used it in a while.
__________________
I love sanding. |
#7
|
|||
|
|||
Well that is a very unique rocket that I have never seen before, very cool design
I agree the nose cone is white. Not sure why in the instructions they suggest not painting the nose cone because “the special plastic material will not accept paint successfully”. Wasn’t the PNC-167 the same type of plastic as their other cones? I have one here I would need to pull it out of a bin to check. I like tbzep’s suggestions. I would use dark red or dark orange for the main color, leave the nose cone and ST-56 streamer pod white and recreate the decals and striping in black and white. Looks like a little white striping around one fin. If you really want to be bold paint it fluorescent red or orange to give it some pop. It’s a decent sized ST-16 model should be really cool just don’t tell GH the first recommended booster motor is a B14-0
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates Last edited by snaquin : 08-19-2020 at 06:12 PM. Reason: Spelling |
#8
|
||||
|
||||
Quote:
https://www.youtube.com/watch?v=_A_5GI0yIEk That would be the only drawback I can initially think of. --But otherwise... Yeah, very cool design.
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#9
|
||||
|
||||
If the motor is recessed too far inside the body tube, it could cause that effect. Hopefully (and one would think the Centuri designers took that potential into consideration), that upper stage motor is not recessed far enough into the body tube to cause a problem.
In the video, the girl does a pretty good job describing everything; I was fairly well impressed at her grasp of the workings of it all. The rule of thumb I recall to try to eliminate that effect was no more than 1/2 the body diameter; I think she said 1 body diameter. Earl
__________________
Earl L. Cagle, Jr. NAR# 29523 TRA# 962 SAM# 73 Owner/Producer Point 39 Productions Rocket-Brained Since 1970 |
#10
|
|||
|
|||
I have 2 of the old Centuri Nike Smoke cones - one is in pretty good shape. As usual, I can't remember where I got them
eRockets/Semroc makes a balsa facsimile without the fine details and hatches: http://www.erockets.biz/semroc-bals...l-sem-bc-16100/ Have a couple of those as well. Now I just have to reproduce the paper adapters and I'll be all set.
__________________
Up next: Under construction: Under repair: In finishing: Centuri Sabre clone In primer: In paint: Ready for decals: Bill Cooke NAR #31312 TRA #19705 SAM #0001 Huntsville, AL My rocket blog My rocket fleet |
Thread Tools | Search this Thread |
Display Modes | |
|
|