Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > BARCLONE > Designer's Studio
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Closed Thread
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-01-2009, 12:39 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default BARCLONE Designer's Studio 2009

This post marks the beginning of our 2009 edition of the Studio. Please use this thread to post BARCLONE-related material and model rocket designs.
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #2  
Old 01-01-2009, 12:45 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default Design Count Update

570...
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #3  
Old 01-01-2009, 05:56 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default SEMROC Body Tube Database File for RockSim 9

Everyone,

Over the last few days, an attempt has been made to create a complete set of component database files (CSV files) for SEMROC items. Small sections of this work has already been posted, but as we check our work, we're finding measurement precision errors in the entries. The problem is easy to correct, but it is equally easy to slip through the cracks.

The new file, attached below, is the full set of body tubes as offered on the SEMROC website. It is being put here for review, so wait before we announce an "all clear" to install it.

Addendum: OK, so much for my ability to pick the right file to upload. I've attached the Semroc BTDATA.CSV file below.
Attached Files
File Type: csv NCDATA_Semroc.csv (27.4 KB, 410 views)
File Type: csv BTDATA_Semroc.CSV (27.2 KB, 382 views)
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635

Last edited by CPMcGraw : 01-01-2009 at 10:39 PM. Reason: Six brain cells, five on vacation, one not speaking with me...
Reply With Quote
  #4  
Old 01-01-2009, 08:34 PM
snaquin snaquin is offline
The_Ripper
 
Join Date: Jun 2005
Location: Louisiana
Posts: 1,941
Default

Quote:
Originally Posted by CPMcGraw
Everyone,

Over the last few days, an attempt has been made to create a complete set of component database files (CSV files) for SEMROC items. Small sections of this work has already been posted, but as we check our work, we're finding measurement precision errors in the entries. The problem is easy to correct, but it is equally easy to slip through the cracks.

The new file, attached below, is the full set of body tubes as offered on the SEMROC website. It is being put here for review, so wait before we announce an "all clear" to install it.


I hadn't run across any errors in the previously posted files yet but I've only used the components in two designs so far that I'm updating for BARCLONE. I kept a complete back up of my v9 install and it's easy enough to load the original component files back in. That's one thing I really like about RockSim is the ease in moving data in and out of the databases by editing the csv files.

Craig, a big thanks to you and Bill for you efforts with producing these component files!

__________________
Steve Naquin
TRA# 677 L2
NAR# 85518 L2
SAM# 0052

🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals
🚀 In Paint & Detail: USR Banshee
🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate
🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim
🚀 Stay Tuned For Fall 2021 Launch Dates
Reply With Quote
  #5  
Old 01-01-2009, 10:41 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default Correction to earlier post

The BTDATA file is now attached to my earlier post, along with the NCDATA file. These contain only those components from the Semroc website which can be drawn with the 'wizards'. There are almost as many that cannot be drawn that way, and for those, we'll have to generate RKT files later.
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #6  
Old 01-02-2009, 12:40 AM
rkt2k1 rkt2k1 is offline
Just another BAR!
 
Join Date: Mar 2005
Posts: 131
Default

Here are the BHDATA (bulkhead) and TCDATA (tube coupler) data files that have been checked and verified for decimal precision.

Craig - please give these the once over and make sure the numeric precision looks ok. I used the technique you suggested in Microsoft Excel to ensure 3 decimal precision on all numeric fields.

Transition file may take a day or so to complete. I actually took a break from parts and was working on my first 2009 design. I hope to post both by the weekend.

Thanks for combining the nose cone and body tube parts into master files!

... Bill
Attached Files
File Type: csv BHDATA_Semroc.CSV (3.4 KB, 386 views)
File Type: csv TCDATA_Semroc.CSV (1.9 KB, 378 views)
Reply With Quote
  #7  
Old 01-02-2009, 01:51 AM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default

Bill,

The data looks OK. The Estes Classic designs seem to have the proper 3-digit precision. I've already imported them into the program. Unless something breaks I'd say use them.
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #8  
Old 01-02-2009, 02:00 AM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Exclamation New Design -- 2009 Test Rocket

Here's my first for 2009. This is a simple 4FNC using the components from our new database files. I think the files are safe, now, after some teething trouble. This rocket is similar to our "Thunder" series from a few years ago, but uses a 13mm motor for power.

Length: 18.925"
Diameter: 0.908" (ST-8)
Fin Span: 3.908"
Weight: 1.001 oz


1/2 A3-2T......124'......Dv 17 FPS......36" x 1/8" rod
A10-3T.........341'......Dv 21 FPS......36" x 1/8" rod
A3-4T..........350'......Dv 9 FPS.......36" x 1/8" rod


Enjoy!
Attached Thumbnails
Click image for larger version

Name:  2009 Test Rocket 2D.jpg
Views: 339
Size:  83.4 KB  Click image for larger version

Name:  2009 Test Rocket 3D.jpg
Views: 408
Size:  43.8 KB  
Attached Files
File Type: rkt 2009 Test Rocket.rkt (48.0 KB, 346 views)
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #9  
Old 01-02-2009, 02:08 AM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default Design Count Update

571...
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #10  
Old 01-02-2009, 05:13 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,357
Default First batch of Transitions and Tail Cones

This first file covers the Series 085 and Series 10 Tail Cones, and the list of standard transitions from the original file. Unless you just want to get a batch of Semroc items into RockSim, hold off on installing this file. Wait until a full set of parts is posted.

Bill, one change from the other files you will need to make is the precision of one column. The "Rear OD" column needs to be set at 4-digit precision if you try creating the reversed nose cones. The OD value needs to be set at 0.0001". This value gives RockSim something to chew on, while not being large enough to be noticed visually.
Attached Files
File Type: csv TRDATA_Semroc.csv (4.9 KB, 323 views)
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
Closed Thread


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 01:33 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2024