Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Swap Shoppe > Wanted: Dead or Alive!
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-28-2019, 05:37 PM
jetlag jetlag is offline
Old BAR
 
Join Date: Aug 2006
Posts: 2,130
Default Cox Sat1B engine retainer and MPC Standard Arm engine mount wanted

Hi folks,
I'm in need of the engine retaining ring for a Cox Sat 1B. I know I could rig something, but would love to have the proper piece. A great item to 3D print perhaps.

Also need an engine mount plate for an MPC Standard Arm. There are 3 offered that should have been in the kit: a standard plate (presumably for 18mm engines, a D engine mount plate, and an FX engine mounting plate.
Again, maybe a candidate for 3D printing?
I'd gladly take any of the 3 plates here if anyone had a spare. Of course, I'll pay cost and shipping.

Thanks in advance!

Allen
Reply With Quote
  #2  
Old 04-28-2019, 11:57 PM
leftover leftover is offline
Lifelong Rocket Scientist
 
Join Date: Mar 2009
Posts: 155
Default

Quote:
Originally Posted by jetlag
Hi folks,
I'm in need of the engine retaining ring for a Cox Sat 1B. I know I could rig something, but would love to have the proper piece. A great item to 3D print perhaps.

Also need an engine mount plate for an MPC Standard Arm. There are 3 offered that should have been in the kit: a standard plate (presumably for 18mm engines, a D engine mount plate, and an FX engine mounting plate.
Again, maybe a candidate for 3D printing?
I'd gladly take any of the 3 plates here if anyone had a spare. Of course, I'll pay cost and shipping.

Thanks in advance!

Allen

Canít do much for you on the Cox but I have a spare FX plates for the MPC.
__________________
NAR # 102461 SR
I have orbited the earth with John Glenn, walked on the moon with Neil Armstrong, landed on Mars, seen Jupiter and Saturn and explored the realm of deep space all thanks to Model rocketry.
God Bless America and The United States Marine Corps
Reply With Quote
  #3  
Old 04-29-2019, 09:09 AM
teflonrocketry1's Avatar
teflonrocketry1 teflonrocketry1 is offline
Craftsman
 
Join Date: Aug 2007
Location: Whitehouse, Ohio
Posts: 230
Default

Quote:
Originally Posted by jetlag
Hi folks,
I'm in need of the engine retaining ring for a Cox Sat 1B. I know I could rig something, but would love to have the proper piece. A great item to 3D print perhaps.

Also need an engine mount plate for an MPC Standard Arm. There are 3 offered that should have been in the kit: a standard plate (presumably for 18mm engines, a D engine mount plate, and an FX engine mounting plate.
Again, maybe a candidate for 3D printing?
I'd gladly take any of the 3 plates here if anyone had a spare. Of course, I'll pay cost and shipping.

Thanks in advance!

Allen


Allen,

I would need a dimensional drawing or an actual part to measure before I can make a 3D printed clone or copy. The problem with most plastic models is that this information is not included or lacking in the instructions for these model rockets posted on the various internet sites. I don't have either of the models in my collection, so I don't have a source for measurements to use for a 3D print of the parts you want.
__________________
Bruce S. Levison, NAR #69055
Reply With Quote
  #4  
Old 04-29-2019, 01:17 PM
jetlag jetlag is offline
Old BAR
 
Join Date: Aug 2006
Posts: 2,130
Default

Quote:
Originally Posted by leftover
Canít do much for you on the Cox but I have a spare FX plates for the MPC.


I will be happy to purchase it from you and pay shipping if that's a plan that works for you, Leftover.
PM me please!

Allen
Reply With Quote
  #5  
Old 04-29-2019, 01:19 PM
jetlag jetlag is offline
Old BAR
 
Join Date: Aug 2006
Posts: 2,130
Default

Quote:
Originally Posted by teflonrocketry1
Allen,

I would need a dimensional drawing or an actual part to measure before I can make a 3D printed clone or copy. The problem with most plastic models is that this information is not included or lacking in the instructions for these model rockets posted on the various internet sites. I don't have either of the models in my collection, so I don't have a source for measurements to use for a 3D print of the parts you want.


If I somehow I acquire one or both (1 engine or 2 engine retainers), I'll get in touch! Thanks for the offer!
Maybe someone here has one that could be borrowed?
Allen
Reply With Quote
  #6  
Old 04-29-2019, 06:37 PM
Flash's Avatar
Flash Flash is offline
Semi-Pro Rocketeer TRA 10484 L2
 
Join Date: Apr 2007
Posts: 117
Default

3D print one
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 06:22 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2019