#51
|
||||
|
||||
Quote:
I was out when the announcment came so I didn't get to order until the next day. So I got Defender #33 and SPEV # 37 (or the other way around). The number really doesn't matter to me since I plan to build them both, but it didn't take long to sell those first kits. |
#52
|
||||
|
||||
ROTFLMAO!!!
I just decided to look at the two "Defenders" I just recieved. Let's see the Defenders are kit #KV-60, right? Well, I got kits #13 and #14 but mine say kit KV-61 SPEV! OOPS! I double checked my order on the SEMROC web site and yes...I did order two "Defenders". Does this raise the value of my two kits? Sorta like the upside down airmail stamp...OK, I guess not. I'm sure Carl, Sheryl and Bruce will fix it when they get back from NARCOM.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#53
|
||||
|
||||
Quote:
Lately I have been using Delta Ceramcoat All-Purpose Sealer. It does a good job of filling and sealing the wood with just a couple of coats, dries fast and sands really smooth. Also, it has no noxious fumes at all and is non-toxic. I found it in the crafts section at Wal-Mart, in the section with the decoupage and craft painting supplies. I'm sure that you'll be able to find it in other craft stores, too, like Michael's. Mark
__________________
Mark S. Kulka NAR #86134 L1,_ASTRE #471_Adirondack Mountains, NY
Opinions Unfettered by Logic • Advice Unsullied by Erudition • Rocketry Without Pity
Last edited by Mark II : 03-10-2007 at 01:39 AM. |
#54
|
||||
|
||||
Label paper vs. photo paper?
Quote:
Quote:
Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#55
|
|||
|
|||
Quote:
So you actually got one each of the SPEV and Defender, or the numbered card insert was just wrong on one of the Defenders? If the latter, I wonder who got the mislabled SPEV kit? |
#56
|
||||
|
||||
Quote:
No...I ordered two (2) Defender kits. I got two (2) SPEV kits. That's all. It was just an oops.
__________________
"I'm a sandman. I've never killed anyone. I terminate runners when their time is up." Logan from "Logan's Run" http://sandmandecals.com/ |
#57
|
||||
|
||||
Delta Ceramcoat All-Purpose Sealer ????
Never heard of it.... NO noxious fumes and non-toxic ? C'mon now, that can't be good, and it definitely is NOT in the spirit of building old-time kits using old-tyme materials/finishing ! That makes about as much sense as trying to launch an Estes Cold-Power rocket WITHOUT the genuine supposed ozone-depleting R-12 Freon propellant.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#58
|
|||
|
|||
Quote:
I use it also because my wife and son have asthma. Sometime I mix lightwieght drywall spackle with it to help fill the deep balsa grain. Walmart and Michael's carry Delta Creamcoat and any Ace will heve the lightwieght drywall spackle. Hope this helps, JP James Pierson NAR# 77907 |
#59
|
||||
|
||||
The Sandman noted:
"No...I ordered two (2) Defender kits. I got two (2) SPEV kits. That's all. It was just an oops." Gordo, Sheryl mentioned that at NARCON when I told her that my wife had said that my order had arrived. They plan on making the "oops" go away. ghrocketman said: "Delta Ceramcoat All-Purpose Sealer ????" I tried it and let it dry for a couple of days. It didn't sand well for me. Like most products, some swear by it and others swear at it. Could have been a bad batch. I will try it again on a project that I am not too concerned about. But not on Defender kits # 13 and 14, SPEV kits # 10 and 11, and Centurion kits #10 and 11. I will build the higher number kit. BTW, most of you know that SEMROC retains kits # 1 through 5. John Dyer of Red River Rocketry gave Carl an original Defender kit last August at NARAM. At NARCON Carl gave John Defender kits #6 and 7. John had to buy one to build! LOL. Chas |
#60
|
|||
|
|||
Quote:
You know back in the 60's when my dad helped me build my first rocket kits he used Aero Gloss dopes and sanding sealer in the bottles exclusively. He built tissue covered planes prior to my getting into rockets so he was very familiar with those paints and that's what we used. It wasn't until later when I wanted to spray my finishes on that I started to purchase the Testors spray enamels in the small cans from the hobby shop. I haven't really used Aero Gloss since I was a kid but I can tell you I do remember the fumes when I'd paint a model at the kitchen table with dad! I may try the method Jay mentioned with the label paper on a future build but not on these beautiful laser cut fins for the Defender. I'm always looking for a short cut to filling and sanding but that's usually when I get into trouble. .
__________________
Steve Naquin TRA# 677 L2 NAR# 85518 L2 SAM# 0052 🚀 In Construction: Der Blue Maxx/Minie-Magg 5.5” & Vander-Burn MDRM Clone w/Stickershock23 Custom Decals 🚀 In Paint & Detail: USR Banshee 🚀 In Build Queue: Estes Doorknob w/Vander-Burn Rocketry Upgrade Kit [Sport Decor], Semroc Centurion-F, Semroc Egg Crate 🚀 In Repair: SLS Lil’ Hustler, SLS Aero-Dart 1969 Trim 🚀 Stay Tuned For Fall 2021 Launch Dates |
Thread Tools | Search this Thread |
Display Modes | |
|
|