Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Semroc > SAM - Semroc Astronautic Modeler Team
User Name
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read

Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
Old 12-21-2012, 02:46 PM
tbzep's Avatar
tbzep tbzep is offline
Dazed and Confused
Join Date: Mar 2005
Location: TN
Posts: 10,552
Default Semroc Midget

I'm building a Midget and have come across an issue with the kit. It is very possible that I've screwed something up, but I don't see how I could have done it.

The kit is designed to use fishpaper engine blocks mounted flush with the top of the sustainer motor tube, and the other mounted flush with the bottom of the booster tube. I have done this.

When I install two shorty blanks included with the kit, there is nearly an 1/8" gap between the booster and sustainer. I've checked to make sure the engine blocks are flush. The sustainer motor mount is flush with the end of the reducer. The booster motor tube is exposed, so there is nothing that can be wrong with it.

Here's where I need help. Can somebody post the length of both your motor tubes, fishpaper engine blocks, and shorty blanks so that I can see if I've got something with an incorrect length? Also, please measure how far the shorty blank sticks out of the sustainer motor tube assembly. I'd be inclined to think I screwed something up during assembly, but this kit is simple and straightforward and I don't see how I could have done it.

I still plan to finish the kit and fly it. It won't be a problem as I'll just cut 1/8" off one of the motors/blanks to get a proper fit. I fly alone so I won't have any NAR conflicts with RSO's who want to argue I've altered the motor. I see no difference in trimming the end and peeling layers to get them to fit a tight motor mount. Safety Nazis just keep to yourselves. A razor saw isn't going to create enough heat to cause paper to burn and I won't be cutting into propellant.
I love sanding.
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

All times are GMT -5. The time now is 06:00 PM.

Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe 1998-2021