#221
|
||||
|
||||
From the "Embarrassing Admissions" Department...
Quote:
.
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
#222
|
|||
|
|||
New Design: Shadow Fox
Here is a new design I call the Shadow Fox. I seem to have gotten a little lucky with this design as it flies on four types of 18mm motors with excellent Dv's. I have also started to add a few design changes to my Rocksim files. I will try to remember to add both Kevlar and elastic shock cords to the design files rather than just the elastic I have used in the past. Also have decided to go back to the engine hook, where possible, just for the convienence and speed of loading.
Enjoy and Thanks Again, JP James Pierson NAR# 77907 Shadow Fox (18mm) Launch guide length: 36.0000 In MOTOR.................MAX. ALTITUDE...........DEP. VELOCITY A8-3..................212.81201 Ft.............0.5395 ft/s B4-4..................470.48885 Ft.............3.5083 ft/s B6-4..................474.77034 Ft.............7.2434 ft/s C6-5..................941.16142 Ft.............2.1599 ft/s . |
#223
|
||||
|
||||
OK, everyone, with the addition of JP's "Shadow Fox" we are officially at 488 . That means all we need is to post the "12 designs" that James has promised us, and we will have reached the target of 500.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#224
|
|||
|
|||
New Design: Mini Hostile Intentions
Since the topic of late has been of upscales/ downscales, how about an mini Hostile Intentions 13mm. With all the parts available from Carl at Semroc this downsizing was fairly easy to do. This design is only 10 inches long and still has has maintained the same design styling of its bigger brother. The flight specs and DV's seem to be good on three of the 13mm motors as well.
Enjoy and Thanks Again, JP James Pierson NAR# 77907 Mini Hostile Intentions (13mm) Launch guide length: 36.0000 In MOTOR.................MAX. ALTITUDE...........DEP. VELOCITY 1/2A3T-2. ............147.99508 Ft.............20.3816 ft/s A10T-3................331.60761 Ft..............6.5751 ft/s A3T-4.................349.01247 Ft.............18.4297 ft/s . |
#225
|
||||
|
||||
Design Count Update
489...
We are now projected to go over the top with the "12 Designs" in December.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#226
|
||||
|
||||
Everyone should take note: In the recent "Peak of Flight" newsletter from Apogee, TVM makes mention of RockSim 9, and while he doesn't indicate a firm target date, the fact that he mentions it at all is of great interest. TVM mentions some features in the new version, and I hope they allow us some additional freedom in what we can incorporate into the new designs.
James Pierson's latest design post will put us at 501 when the "12" are posted. Now we need to come up with a new milestone to achieve. I propose we begin an all-out effort to flex our muscles and strain our creative juices, and see how long it takes us to reach 1000 designs! There are over a dozen contributors to the BARCLONE project. If each member could design just ONE NEW MODEL EACH WEEK, we would reach that goal before the end of 2009. Is this feasible? Or is it nuts?
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#227
|
|||
|
|||
New Design: Swordfish 1
CPMcGraw Quote:
Quote:
Both!... Feasible and Nuts. No promises but I will do my best. Here is an interesting design with an sleek body style I call the Swordfish 1, mainly for the lack of a better name. This design also has good Dv's and reaches good altitudes for its size. You know... when I start a "fish theme" I must be straining for an original idea . Enjoy and Thanks Again, JP James Pierson NAR# 77907 Swordfish 1 (18mm) Launch guide length: 36.0000 In MOTOR.................MAX. ALTITUDE...........DEP. VELOCITY B4-4..................366.46326 Ft............. 6.1055 ft/s B6-4..................375.62992 Ft..............1.2310 ft/s C6-5..................869.52756 Ft..............6.1394 ft/s . |
#228
|
||||
|
||||
Quote:
Nice-looking theme, JP. And it's hard to beat those numbers. Good ideas come from strange sources sometimes... 490...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#229
|
||||
|
||||
Craig throws down the gauntlet, and Jay just looks at it...
Quote:
On the Apogee website, TVM mentions that RS9 should be available in time for Christmas. (I've already set my $100+ aside.) Quote:
(Stage whisper) Now *watch.* We'll make 1000, and he'll raise the number AGAIN! All the same, see a following post with my contribution for this week. Or this month, given my decidedly non-James Pierson-like output capabilities. Cheers,
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 Last edited by CenturiGuy : 11-06-2008 at 11:38 PM. |
#230
|
||||
|
||||
New Design: XPL Experimental
I almost submitted this design late last night, until I decided it needed some more detailing. Hence the birch "Dowel Detail" assemblies (the middle dowel is 1" from the front of the body tube), which also added some additional nose weight. Then I threw the 3 CR-1013 centering rings on as well.
Surprisingly simple, but it follows my general design philosophy of, "Put a *bunch* of different-looking parts together." (This is what I get for hanging out with JP. ) .
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
Thread Tools | Search this Thread |
Display Modes | |
|
|