This is not exactly a "new" plan, but it's new to this thread.

The model is a payloader, capable of handling a 1/2 oz mass in the payload compartment. You will notice the payload tube is shown as "CPT-10", which is not currently available. Just substitute an equal length section of ST-10.

This model has flown "in the wild".

Length: 20.70"
Diameter: 1.04" (ST-10)
Fin Span: 3.54"
Weight: 1.35 oz (empty)

A8-3......0.0 oz payload......202'......Dv 8 FPS.......36" rod
A8-3......0.5 oz payload......140'......Dv 19 FPS......40" rod
B6-4......0.0 oz payload......475'......Dv 14 FPS......36" rod
B6-4......0.5 oz payload......380'......Dv 12 FPS......36" rod
C6-5......0.0 oz payload......990'......Dv 14 FPS......36" rod
C6-5......0.5 oz payload......895'......Dv 17 FPS......36" rod

The A8-3 with a payload is not a recommended configuration. Only use this motor for initial test flights with no payload installed.

Enjoy!

Attached Thumbnails

   

Attached Files

Nova v2.rkt (66.7 KB, 95 views)

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635