|
#1
|
||||
|
||||
Need Inkjet Decal Paper Recommendation!
I'm currently less than satisfied with my current inkjet decal paper which is a brand called "Printers Jack" that I got on Amazon. The edges tend to roll up when applying the decals and It's difficult to get all the air bubbles out. It also doesn't tolerate Solvaset which I like to use to snug down decals over uneven surfaces.
Is there a brand of paper that acts more like silk-screened decals you would get in a commercial kit? From what I can see, commercial decals are a tad thicker which may be why they have fewer issues. Cartograph makes the best decals on the planet but they are almost exclusively seen in plastic model kits. Anyway, I appreciate any recommendations or also letting me know if there are any other brands I should stay away from. Thanks, Don |
#2
|
||||
|
||||
I've used the "Sunnyscopa Waterslide Decal Paper for INKJET Printer " that you can get on Amazon.
If your edges are rolling up soak it in water longer until the decal unrolls itself. You are not going to get thick opaque decals like they were silk-screened from an inkjet printer. That said, I am satisfied with this paper. Easy to use. I use a Canon MG5220 inkjet printer and spray Krylon clear lacquer over the decals to seal them.
__________________
-Wolfram v. Kiparski NAR 28643 - TRA 15520 MTMA Section #606 President |
#3
|
||||
|
||||
Thank you. I've heard others recommended the Sunnyscopa laser decal paper for those printers so I might just give that brand a try.
I know I'm not going to get the opacity of silk screen decals on an inkjet, but am just looking for a paper that "behaves" a little better during application. My experience with the Printer's Jack was that leaving it in the water longer only made the problem worse. Thanks again for the recommendation! Don |
#4
|
||||
|
||||
If in doubt, Micro-Mark will always have quality decal materials. I've never had a bad batch from them, plus they have all the setting solutions and accessories you need.
Inkjet and Laser decal paper Solutions .
__________________
I love sanding. |
#5
|
|||
|
|||
I'll second the Sunnyscopa decal sheets.
I'm really happy with the results.
__________________
NAR #27085 - Oregon Rocketry - SAM |
#6
|
||||
|
||||
The same paper from Micro-Mark is also available from
https://www.world-paper.com/Watersl...terslide-01.htm Cheaper than Micro-Mark, 25 sheets for $25.50 before shipping That same blue ink "Inkjet/Clear waterslide decal paper" is printed on the back.
__________________
Hans "Chris" Michielssen Old/New NAR # 19086 SR www.oddlrockets.com www.modelrocketbuilding.blogspot.com http://www.nar.org/educational-reso...ing-techniques/ Your results may vary "Nose cones roll, be careful with that." Every spaceman needs a ray gun. Look out - I'm the Meister Shyster! |
Thread Tools | Search this Thread |
Display Modes | |
|
|