Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Swap Shoppe > Wanted: Dead or Alive!
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09-19-2021, 11:29 PM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,011
Default Looking for a body tube.

A colleague of mine is looking for the main BT for the Estes #2111 Mercury Atlas. I believe this subject has been discussed here before but I don't if availability has changed since then.

I do know it's 3.4" OD (86 mm) x 18" long and it's VERY close in OD to the main BT of the OOP LJII.

Is there any place to get one?

Thanks!
__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

NAR# 94042
SAM# 0078
Reply With Quote
  #2  
Old 09-20-2021, 09:45 AM
tbzep's Avatar
tbzep tbzep is offline
Dazed and Confused
 
Join Date: Mar 2005
Location: TN
Posts: 10,807
Default

Quote:
Originally Posted by jeffyjeep
A colleague of mine is looking for the main BT for the Estes #2111 Mercury Atlas. I believe this subject has been discussed here before but I don't if availability has changed since then.

I do know it's 3.4" OD (86 mm) x 18" long and it's VERY close in OD to the main BT of the OOP LJII.

Is there any place to get one?

Thanks!

If all else fails, modify a BT-100 or BT-101. I've done it to make both larger tubes and smaller than the original O.D. Scale guys used to do it all the time. I don't know if they still do or if they get custom made tubes.

Just slit the tube lengthwise, cutting a strip the correct width to get your 3.4" O.D. Use the strip as backing on the inside of the tube to glue the tube back together. He will need to cut notches in his centering rings, but it works great. Fill the seam just like you would fill spirals. He will finally get to use some of the high school geometry he never thought he'd ever use to figure out the proper circumference for the O.D. he needs.
__________________
I love sanding.
Reply With Quote
  #3  
Old 09-20-2021, 10:20 AM
jeffyjeep's Avatar
jeffyjeep jeffyjeep is offline
Old Submariner
 
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,011
Default

Quote:
Originally Posted by tbzep
If all else fails, modify a BT-100 or BT-101. I've done it to make both larger tubes and smaller than the original O.D. Scale guys used to do it all the time. I don't know if they still do or if they get custom made tubes.

Just slit the tube lengthwise, cutting a strip the correct width to get your 3.4" O.D. Use the strip as backing on the inside of the tube to glue the tube back together. He will need to cut notches in his centering rings, but it works great. Fill the seam just like you would fill spirals. He will finally get to use some of the high school geometry he never thought he'd ever use to figure out the proper circumference for the O.D. he needs.


Ah so! I think I remember a thread on that procedure.

Thanks!
__________________
Never trust an atom. They make up everything.

4 out of 3 people struggle with math.

NAR# 94042
SAM# 0078
Reply With Quote
  #4  
Old 09-20-2021, 11:30 AM
the mole's Avatar
the mole the mole is offline
Master Modeler
 
Join Date: Mar 2005
Location: Illinois
Posts: 722
Default

Looks like we are thinking about the same thing.
I have a 3D printer and found a file done by Scottdee who is a member here, of the ESTES Mercury-Atlas. All I needed was the body tube. After reading some threads here I decided to cut down an old Saturn V tube. You can buy one from ESTES. The first thing I did was make a mandrel of the original Mercury-Atlas tube to help form the Saturn V tube around.
I cut the Saturn tube formed it around the mandrel and glued it up. Did this over the weekend still have to glue the strip of tubing on the inside for strength.

It's nice to know if this one crashes and burns I have the ability to build another one.
Attached Thumbnails
Click image for larger version

Name:  MA 1.jpg
Views: 27
Size:  60.8 KB  Click image for larger version

Name:  MA 2.jpg
Views: 18
Size:  57.8 KB  Click image for larger version

Name:  MA 3.jpg
Views: 30
Size:  70.7 KB  
Reply With Quote
  #5  
Old 09-20-2021, 11:49 AM
TigerHawk TigerHawk is offline
Model Rocketry - The Good Ole Days
 
Join Date: Sep 2019
Location: Tennessee
Posts: 615
Thumbs up

Jeff, Here’s some information you might like,
https://oldrocketplans.com/estes/est2111/est2111.pdf

Last edited by TigerHawk : 09-20-2021 at 03:38 PM.
Reply With Quote
  #6  
Old 09-20-2021, 12:18 PM
the mole's Avatar
the mole the mole is offline
Master Modeler
 
Join Date: Mar 2005
Location: Illinois
Posts: 722
Default

Thanks, TigerHawk I have that info and a ton of other stuff on the Mercury-Atlas.
This is my project for the Fall and Winter. My hat is off to Scottdee for his work on the 3D file.
For me, the ability to print rocket parts has opened up a lot of possibles. Don't get me wrong if ESTES puts the Mercury-Atlas kit out again I would buy more than one in a heartbeat.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 11:19 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2021