#1
|
||||
|
||||
RockSim Components
I'm going to start this thread with a rendition of the Ping Pong Ball. The specs follow the general information we've seen already. I'm calling for a 0.002" thick wall on a two-piece sphere 1.566" in diameter. If anyone has better information, especially on the wall thickness, feel free to alter this file and re-post it.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#2
|
||||
|
||||
SEMROC BC-760 Nose Cone
Here's one that has been put to use since it was introduced in 2006. It is made in three pieces -- the forward ogive, a center, and the aft transition. The center section is useful for referencing the launch lugs from, as it positions them outward at the correct distance to clear the bulge.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
|||
|
|||
Fliskits BT-70 Engine Mounts (24mm)
Fliskits has a great selection of engine mount kits for BT-70 size models.
Here are a couple of the 24mm motor size mounts. Enjoy and let me know what you think! ... Bill P.S. You need to remove ".txt" from sub-assembly filenames as ".rsa" files can not be directly posted to forum. Last edited by rkt2k1 : 02-11-2009 at 10:15 PM. |
#4
|
|||
|
|||
Fliskits BT-70 Engine Mounts (24mm) #2
Fliskits has a great selection of engine mount kits for BT-70 size models.
Here are a couple more of the 24mm motor size mounts. Enjoy and let me know what you think! ... Bill P.S. You need to remove ".txt" from sub-assembly filenames as ".rsa" files can not be directly posted to forum. |
#5
|
|||
|
|||
Fliskits BT-70 Engine Mounts (18mm)
Fliskits has a great selection of engine mount kits for BT-70 size models.
Here are a few of the 18mm motor size mounts. Enjoy and let me know what you think! ... Bill P.S. You need to remove ".txt" from sub-assembly filenames as ".rsa" files can not be directly posted to forum. |
#6
|
||||
|
||||
It's also possible to open two instances of RockSim, and copy-n-paste from one to the other.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#7
|
|||
|
|||
Quote:
This has now been remedied. You can now post .rsa files directly.
__________________
Scott D. Hansen Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe! Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies! Ye Olde Rocket Forum WOOSH NAR Section #558 |
#8
|
||||
|
||||
Nose Cone SEMROC BC-838
This is a re-post of a file from 2008. It is the nose cone from the SEMROC Recruiter.
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#9
|
|||
|
|||
Quote:
Thanks Scott !! This will make posting sub-assembly files much easier going forward. ... Bill |
Thread Tools | Search this Thread |
Display Modes | |
|
|