|
#1
|
||||
|
||||
WANTED: MPC Minijet Motors 13mm B3-anything
Hello folks. I recently purchased a bunch of MPC kits on eBay and noted that their B3-5 Minijet motors were recommended. I've seen these talked about in forums here in the past. I would give my eyeteeth to pick up a couple of packs of these to use in these rockets. I would gladly buy or trade. I have a couple of rare packs of Canaroc engines (one pack of 18mm, one 24mm) as trade bait. I realize that most of these motors are probably held by collectors, so if you have multiple packs in your collection and wouldn't mind trading a couple of packs, I would trade the Canaroc engines for them. Would also be interested in some B3-3 and B3-0 if those are available.
Please PM me. Joe Last edited by mojo1986 : 11-24-2019 at 09:14 AM. |
#2
|
||||
|
||||
I just checked my stock.
I thought I still had some loose ones but do not. I will sniff around my contacts and off-site stash of my childhood home for you. Not sure if you are aware, Centuri produced B4-xm 13mm motors also.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
#3
|
||||
|
||||
Thanks, GH. Sure, Centuri B's in 13mm would be great too. I also have found some other older MPC 18mm motors as well that I could trade.
Anybody else?? |
#4
|
||||
|
||||
There are 13mm Apogee Medalist motors out there too.
|
#5
|
||||
|
||||
Quote:
Thanks, Jerry. But I think they're probaly as scarce as the other ones. |
#6
|
||||
|
||||
IMO, good luck getting it back on a mini B motor. OTOH, all of the MPC Minirocs kits were T-15 based. These days, I tend to use a maximum motor size of a 1/2A in minimum-diameter mini motored rockets.
__________________
'Til next time, Mike Toelle NAR 31692 L1 SAM 0373 |
Thread Tools | Search this Thread |
Display Modes | |
|
|