Carl,

Do you have the balsa equivalents for those Estes SAROS parts in your catalog?

I realize the fin can could be fabricated from tubes and balsa fins, maybe a paper wrap, but do you have a BNC and BR that match?

Fins?

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635

He's definitely got the nose and reducer. the fin can can be reduced to just a couple of shrouds and the fins are an inch in span (maybe a inch and an eighth), the root is probably an inch and a quarter, and the tip is 3/4" with the trailing edge square.

__________________
Roy
nar12605

BNC-20ED

http://www.semroc.com/Store/Scripts...?idproduct=1048


TA-2050

http://www.semroc.com/Store/Scripts...p?idproduct=829


Fins should probably be 1/16" balsa.


Cheers,

Attached Files

	Saros-Semroc_New.rkt (119.1 KB, 30 views)
	SAROS_13mm.rkt (57.8 KB, 27 views)

__________________
Jay Goemmer
"Centuri Guy"/"Tau Zero"
YORF Member 28
Semroc SAM #0029
NAR 86131

"Your lightyears may vary."


“Centuri fret buzz in an updated form.”
Bill “Wallyum” Eichelberger re: Estes Flutter-By
03 Sept 2014

Thanks, guys! I thought Carl had already put these into his alien contraption, but I couldn't remember the part numbers.

So I guess I no longer have an excuse for not building one...

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635

The Saros also had formed wraps, didn't it?

__________________
SAM # 0011