#1
|
|||
|
|||
Colossus clone
This pic seems to work in the test area, so I'll try here. This was cloned a couple years ago. Raped an Executioner with Stickershock vinyl. https://forums.rocketshoppe.com/att...tid=57601&stc=1
|
#2
|
||||
|
||||
Quote:
I have an original I built, and yours looks great! |
#3
|
|||
|
|||
Quote:
Thx for the compliment. |
#4
|
||||
|
||||
+1 to that.
Looks great ! Did you put a 29mm mount in it or stock 24mm ?
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#5
|
||||
|
||||
Very nice job!
I have that one on my build list for winter. |
#6
|
|||
|
|||
Quote:
Left it at 24mm. |
#7
|
|||
|
|||
Looks great. This one has long been on my list of rockets to clone, but it's a long list.
__________________
Bill Eichelberger NAR 79563 http://wallyum.blogspot.com/ I miss being SAM 0058 Build floor: Centuri Mini Dactyl Estes - Low Boom SST Semroc - Marauder, Shrike, SST Shuttle In paint: Canaroc Starfighter Scorpion Estes F-22 Air Superiority Fighter, Multi-Roc, Solar Sailer II Semroc Cyber III Ready to fly: Estes - Solar Sailer II Semroc - Earmark, Groonie Der V 1/2 |
#8
|
||||
|
||||
Clone this earlier this year. I upgraded to 29mm.
-W
__________________
-Wolfram v. Kiparski NAR 28643 - TRA 15520 MTMA Section #606 President |
#9
|
||||
|
||||
I may pick up a Maxi Alpha and a section of BT80 to clone as well.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, and HAVOC ! |
#10
|
|||
|
|||
Quote:
As per the plans, the Colossus uses four 9" long BT80's to get 36". I cloned it with BT80's from Balsa Machining, which are 34" long. I just added a 2" section from another tube, and eliminated 2 of the BT80 joints. |
Thread Tools | Search this Thread |
Display Modes | |
|
|