Here's one that could not possibly have been done in V8. The flight simulations look good, even though the time delays are short. This is a ring tail design, after all.

Still cannot do a decent canopy yet...

Length: 16.63"
Diameter: 0.908" (ST-8)
Fin Span: 6.84"
Weight: 1.51 oz


B6-2......195'......Dv 10 FPS......36" x 1/8" rod
B4-2......199'......Dv 8 FPS.......36" x 1/8" rod
C6-3......369'......Dv 19 FPS......36" x 1/8" rod


On the sketch, I called out ST-7 tubes for the fin pods. These turned out to be too large, so I dropped them down to ST-5.

Enjoy!

Attached Thumbnails

   

Attached Files

Bansheeta V9.rkt (100.3 KB, 87 views)

__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635