|
View Poll Results: What is your preferred Balsa Wood Sealer | |||
Brodak sanding sealer | 15 | 18.52% | |
Epoxy | 0 | 0% | |
Diluted Elmers carpenter glue | 3 | 3.70% | |
Full strength Elmers carpenter glue | 1 | 1.23% | |
Lacquer automotive primer | 0 | 0% | |
Enamel automotive primer | 4 | 4.94% | |
Water based primer | 0 | 0% | |
Plain old dope | 5 | 6.17% | |
CA glue | 2 | 2.47% | |
Elmers wood filler | 28 | 34.57% | |
Spackle | 2 | 2.47% | |
Other | 21 | 25.93% | |
Voters: 81. You may not vote on this poll |
|
Thread Tools | Search this Thread | Display Modes |
#11
|
||||
|
||||
I always have and always will say NO to low VOC fillers/sealers.
Yuck. Sanding my OT booster is worse than the SST. Got that one just about done.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!! Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't ! Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY. ALL systems are GO for MAYHEM, CHAOS, TURMOIL, FIASCOS, and HAVOC ! |
Thread Tools | Search this Thread |
Display Modes | |
|
|