#1
|
|||
|
|||
Why the difference in Windows/Mac version ??
I am demoing both the Mac and Windows version(s) of rocksim with my Gemini Titan 4..Both versions show a max altitude of 776 Ft but the displays in 2d are much different. .On the windows version the sim/display shows the apogee at 776 ft pops the chute at 7 sec delay..The Mac version keeps going to 1251 feet to Apogee...Ive attached the RKT is someone wants to give it a whirl...
If someone is running a MAC can you see if you get the same results...I got 8 trys left or 14 days... Thanks |
#2
|
||||
|
||||
Quote:
I just ran your file on Win7, and I'm getting 1240-1250 altitude range, with 9 seconds to apogee, and a Dv spread from 12 FPS to 24 FPS using that G80-7. The simulation runs also suggest you will need at least a 6' launch rod...
__________________
Craig McGraw BARCLONE Rocketry -- http://barclone.rocketshoppe.com BARCLONE Blogsite -- http://barclone.wordpress.com BARCLONE Forum -- BARCLONE Forum BARs helping BARs SAM 0044 AMA 352635 |
#3
|
|||
|
|||
Quote:
I wonder what I am doing wrong...Thanks, now I can look for those results... I think I have found it...I am using an older G80, I belive you are using the new one (G78)..If not, its back to the drawing board.... Last edited by BRC : 08-12-2009 at 03:04 PM. Reason: Research !! |
#4
|
|||
|
|||
Quote:
I am not getting the same results regarding a 6', I am getting 36" ..Wonder why the difference...?? |
Thread Tools | Search this Thread |
Display Modes | |
|
|