Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > Building Techniques
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-18-2022, 03:38 PM
Rktman's Avatar
Rktman Rktman is offline
Mad for modrocs
 
Join Date: May 2019
Location: Chapel Hill, NC
Posts: 71
Default Laser Cutter Recommendations

Hi All, many of you have used or own laser cutters, so any advice or suggestions for a dependable desktop laser cutter would be much appreciated. (Not interested in a CNC machine).

It'll be used primarily to cut 1/16" - 1/4" balsa for gliders. Not sure if it's okay to also laser-cut hollow and solid carbon rods with a thickness of 1/8" but if heating doesn't produce any problems like toxic fumes, I'd also be using it for that purpose too.

Is 40W overkill or is it in the ballpark? A laser cutter with a pass through would be ideal, but if that jacks the price too much, an effective cutting area of 16" long x 3" - 4" wide should handle most if not all of my needs.

Ease of adjustment, whether the manufacturer includes laser cutter control software (not design software, I already have Adobe Illustrator), any maintenance issues, decent customer service and life of the laser tube would also be concerns. I won't need to use it continuously to make kits or anything, just on an as-needed hobby basis for my own projects. I'm looking to get something that doesn't require water-cooling, just air-cooling, and preferably something US-made and serviced. Recommendations?
__________________
“I would like to die on Mars. Just not on impact”. — Elon Musk

“Minds are like parachutes--they only function when open”. —Thomas Dewar
Reply With Quote
  #2  
Old 08-18-2022, 10:29 PM
Earl's Avatar
Earl Earl is offline
Apollo Nut
 
Join Date: Dec 2006
Posts: 4,143
Default

To be honest at this juncture, I could see getting a laser cutter too; well before a 3-D printer (though I know you are not drawing comparisons here). Lots of ‘news’ about 3-D printers these days, but I still have not seen the output from one (well, one that most hobbiests could afford) that really truly is ready for prime time.

A laser cutter however seems like something many of us could use and use effectively and productively.

So, yes, I too would be interested in hearing any recommendations anyone has relative to the general specs outlined above.

Earl
__________________
Earl L. Cagle, Jr.
NAR# 29523
TRA# 962
SAM# 73
Owner/Producer
Point 39 Productions

Rocket-Brained Since 1970
Reply With Quote
  #3  
Old 08-19-2022, 01:18 PM
LeeR's Avatar
LeeR LeeR is offline
Retired with Way Too Many Kits
 
Join Date: Jun 2007
Location: Colorado
Posts: 3,082
Default

My experience with laser cutting almost 10 years ago still has me wanting to own one prior to buying a 3D printer. I worked for a small engineering prototyping shop. I used a large Epilog Laser, and used it personally to cut centering rings and fins, and also lots of other materials like acrylic, poster board, and leather, for work. My only regret is not making a LOT more centering rings before I retired!

I recently bought 3D printed fins from Boyce Aerospace for an old Estes Maxi Honest John. They required very little sanding, prior to priming. I have not completed the build, I still must build the launch lug carriers. But the look and fit is so much better than the vacuformed fins.

I think my choice of laser over 3D printer is that I tend to make parts from wood when possible, and will likely keep buying commercially available 3D parts for detailed parts.
I have used CNC for cutting wood, but laser is still my preferred tool for things like centering rings and fins. I also have a wood lathe and enjoy turning nose cones, transitions, nose blocks, and tail cones or engine nacelles.
__________________
Lee Reep
NAR 55948

Projects: Semroc Saturn 1B, EAC Firecat (Mini HoJo bash)
In the Paint Shop: Estes 1:100 Saturn 1B (old #2048 kit)
Launch-Ready: Farside-X, Maxi Honest John, Super Scamp
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 09:25 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2022