![]() |
#1
|
||||
|
||||
![]() I just came across these plans (see: www.youtube.com/watch?v=SXMVI6J7UTk ) for a sailplane-type glider (having a fuselage, long wings, and a V-tail) that can be made—at no cost—out of paper! Also, this T-tailed sailplane (see: www.youtube.com/watch?v=BHiHg-ho8D8 ) is made out of foam picnic plates! Both of them could, with minor modifications, be converted into pop-pod boost-gliders (B/Gs) powered by 13 mm mini motors or 6 mm MicroMaxx motors.
I hope this information will be helpful.
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR |
#2
|
|||
|
|||
![]() I've toyed around with the idea of using papery-type stuff for BG wing surfaces in the past, notably around 2009/10. Even made a paper BT-80 sized Bomarc that probably wouldn't survive boost on a C6....
IINM, 2mm Depron is much stiffer and actually *lighter* than standard copy paper. Back then, I actually made a BT-55 sized gliding Bomarc, using the 2mm Depron for the wings/tail, and the body plus NC rolled from single ply copy paper. Pod tube was also rolled similarly, as it was 13mm. That actually boosted - and glided - pretty darned well!! Problems: 1/ Being all paper and Depron, any hot ejection charge chars or even burns the thing! Think: Mini-Hindenburg ![]() 2/ Guy with a sub-2000 Tripoli number flying this sort of stuff at an HPR launch looks too weird, even by my standards. So, I quit doing these soon thereafter. I also had made up a 'full sized' SkyDart this way, as well as a downscale of my 'Nemesis' glider. If I had someplace private to fly, I'd get back to these things. Neat to use 13mm motors to fly 'full sized' sport gliders! |
#3
|
||||
|
||||
![]() Occasionally helping a teacher in Eagle, Alaska (she uses model rocketry and radio & electronic projects in her students' STEM [Science, Technology, Engineering, and Mathematics] classes), the paper boost-gliders struck me as being good for very low-cost school projects. Depron would be more durable, though. Also:
If water glass (a solution of sodium silicate, which Jetex modelers used [and still use] to flame-proof the rolled card stock and rolled 1/64" sheet balsa jet pipes in some of their jet models) would work with depron, that might solve the "Hindenburg" problem. The brevity of the "heat & flame pulse" from a model rocket motor's ejection charge would work in your favor here, and: I've always thought that HPR is best enjoyed as a "spectator sport" (watching others fly their big, expensive models powered by big, expensive motors), while flying far smaller--and cheaper--model rockets that, in many cases, can actually go higher! :-)
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|