|
#1
|
||||
|
||||
Semroc Mars Lander
Semroc Mars Lander possible build.
I got this rocket a few weeks ago. I open the kit(it was factory sealed) inventoried the kit, and found it missing two of the "ball bearings" for the legs. I was planning to build it like I did with my Kosroc kit I built twenty years ago with the modifications of the steel springs and "D" power motor mount. I spent the last two and a half days searching YORF for issues on this kit build and was made some notes to some problems. Some people changed out the rubber hinges for Robart #307 hinges. Question? How are the hinges attached? I can't find any pic's showing this modification. Also, how are the springs attached? Any help would be appreciated. BTW, Semroc's kit is beefier than Estes.
__________________
If it flies, I can crash it! |
#2
|
|||
|
|||
__________________
I like the unusual, the off beat, the avant-garde. No 3/4 FNC for me! |
#3
|
||||
|
||||
Quote:
Thank you for that.
__________________
If it flies, I can crash it! |
#4
|
||||
|
||||
Sorry, but that kit just doesn't have the balls to be a cool rocket.
__________________
I love sanding. |
#5
|
||||
|
||||
Well, my Mars Lander with 4 fans going keeps things cool.
__________________
Contest flying, Sport flying, it's all good..... NAR# 18723 NAR.org GeorgesRockets.com Georges'CancerGoFundMe: https://www.gofundme.com/f/help-geo...ay-fight-cancer |
#6
|
||||
|
||||
The Robarts site has this how-to https://cdn.shopify.com/s/files/1/0...5c8b7d.pdf?3668
although I don't see how you'd drill a 1/8" into the dowels...do you drill a hole in the leg of the hinge and glue the dowel in it? Last edited by rocketguy101 : 01-18-2021 at 12:26 PM. |
Thread Tools | Search this Thread |
Display Modes | |
|
|