I started collecting the parts to Clone the 1338 Estes Space Transporter America. I could not find any build threads on cloning this one. What do you suggest I use for the Corrugated wraps. Was looking at PLASTIC PATTERN SHEETS http://miniaturetree.com/67-plastic-pattern-sheets but impossible to tell what will work.

__________________
Build floor: Estes Pro Series Jayhawk, Estes LTV Scout, Semroc Launch

In paint:
Semroc GryoRoc

Ready for 1st flight:
Estes Doorknob, SQW DSRV Gartrell, Estes SASHA, Estes Delta Star, BT60 3D Print Bomarc, thanks Texas Winds and rain.
Austin TX

Check out John Brohm's thread:

https://forums.rocketshoppe.com/sho...sporter+America

__________________
-Wolfram v. Kiparski
NAR 28643 - TRA 15520
MTMA Section #606 President

I have a original kit.
Those parts are unique to the kit to the best of my knowledge.
Probably why you don't see it cloned.

__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL, if you have to ask what is "NORMAL" , you probably aren't !
Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
ALL systems are GO for MAYHEM, AGITATION, CHAOS, TURMOIL, FIASCOS, AGGRAVATION, INSTIGATION, NUISANCE-ACTION, and HAVOC !

At a NARAM in Pueblo, CO in 2018, the Flying I Beam Team flew an Estes Space Transport America model in the event of flying historic kits. The model was built by John Brohm and was Exquiste. He used some plastic sheeting for the wrap. (just saw that Astronwolf posted the build thread).
I was entering as an individual and built the kit stock. I did not finish the build due to the decals not co-operating before the entry deadline.
I have a set of decals on order from CMR Decals to, hopefully, finish the kit. My one "claim to fame" was to punch out and install red "engine covers" on the removable engine display.
Wish they would bring this kit back.
Chas

Attached Thumbnails

 

__________________
Charles Russell, MSgt,USAF (ret.)
NAR 9790, Lvl 1
SAM "Balls Three"

Those wraps are fairly simple.

I did some experimentation making wraps using an embossing tool and a paper cutter some time ago.

https://www.oldrocketforum.com/showthread.php?t=5471 Scroll down to post #8.

I showed it to some DARS members as well as to Carl. He and I discussed the possibility to build a CNC machine to do that...

If I was to do that today, I would print parallel lines onto the cardstock to guide the embossing.


Bill

__________________
It is well past time to Drill, Baby, Drill!

If your June, July, August and September was like this, you might just hate summer too...

Please unload your question before you ask it unless you have a concealed harry permit.

: countdown begin cr dup . 1- ?dup 0= until cr ." Launch!" cr ;

Give a man a rocket and he will fly for a day; teach him to build and he will spend the rest of his days sanding...

Thanks Bill those are great. Will give it a try, before I go the plastic sheeting route.

__________________
Build floor: Estes Pro Series Jayhawk, Estes LTV Scout, Semroc Launch

In paint:
Semroc GryoRoc

Ready for 1st flight:
Estes Doorknob, SQW DSRV Gartrell, Estes SASHA, Estes Delta Star, BT60 3D Print Bomarc, thanks Texas Winds and rain.
Austin TX

The Estes Space Transporter America is one of my favorite models, and one of my favorite builds. I share Chas' view - if you like building, then the STA would make a great bring-back kit.

I'm not sure I ever posted my actual build article for the model, so I've attached it, below. This is a slightly edited version of the article that appeared in our club newsletter some years ago. Apologies to Scott if this is a duplicate. Hope it can be of help to prospective STA cloners!

Attached Files

Space Transporter America (V2).pdf (1.60 MB, 38 views)

__________________
John
YORF #003
SAM #004

Your excellent articles are always welcome here, John!

__________________
Scott D. Hansen
Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe!
Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies!
Ye Olde Rocket Forum
WOOSH NAR Section #558