#1
|
|||
|
|||
estes ZINGER
Looking to clone this very basic 3fnc bird.
problem is ..... can not find a scan of the fin pattern anyplace. so, the obvious question - anyone have the fin pattern for this one ? ( or complete plans, too :-), send to mysefl and Scott, please thanks for any info. ~ AL |
#2
|
||||
|
||||
I just measured the pattern from my kit.
Leading edge, tip, and trailing edge all meet at 90 degree angles forming a rectangular shape. Leading edge: 53 mm Tip: 13 mm Trailing edge: 40.5 mm Balsa is 1/16th thick. Hope this helps.
__________________
Mike Fields |
Thread Tools | Search this Thread |
Display Modes | |
|
|