Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > Building Techniques
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 04-07-2021, 09:44 AM
BobP_in_Nevada's Avatar
BobP_in_Nevada BobP_in_Nevada is offline
Intermediate Rocketeer
 
Join Date: Aug 2012
Location: Sparks, Nevada
Posts: 47
Default Launch Rod Poll

Hi! Quick question. Do you ...

a) use the two-piece launch rods provided with most launch pads?

b) use a single-piece launch rod?

c) use a launch tower because you're really old school?

d) shun rods entirely in favor of rails?

Please assume this is for low-power (D and below motors) launching.

Details about your choice would be welcome. How "dangerous" actually is that mid-rod joint on the assembled rods?

Yup, it's the old "portability vs. utility" question. I don't necessarily mind hauling around a length of pipe to keep my one-piece rods in, but I'd just as soon not if there's no real value in it.

Cheers!
__________________
Bob Portnell, Sparks, Nevada
NAR #87762, NARTREK Silver, SAM #440, Not an actual Silver Snoopy awardee

"Flying Like It's 1975"
Reply With Quote
  #2  
Old 04-07-2021, 10:09 AM
TigerHawk TigerHawk is offline
Model Rocketry - The Good Ole Days
 
Join Date: Sep 2019
Location: Tennessee
Posts: 498
Thumbs up

Single piece launch rods. 36” long for 1/8” & 3/16” rods, 48” long for a 1/4” rod.
Reply With Quote
  #3  
Old 04-07-2021, 10:14 AM
mojo1986's Avatar
mojo1986 mojo1986 is offline
Old Canuck Modeller
 
Join Date: Mar 2005
Location: Kingston, CANADA
Posts: 1,958
Default

36" 2-piece from Estes. Never had a problem with it.
Reply With Quote
  #4  
Old 04-07-2021, 10:24 AM
barone's Avatar
barone barone is offline
Master Modeler
 
Join Date: Apr 2005
Location: Bartlett, TN
Posts: 3,197
Send a message via Yahoo to barone
Default

Single piece 36”. Carry in a PVC tube. In addition to keeping the rods from getting bent, the PVC helps prevent rusting. I wipe them down with WD-40 before storing.
__________________
Don
NAR 53455
"Carpe Diem"
Reply With Quote
  #5  
Old 04-07-2021, 10:30 AM
Earl's Avatar
Earl Earl is offline
Apollo Nut
 
Join Date: Dec 2006
Posts: 3,379
Default

I have a single piece stainless steel 3/16" and 3/8" rods. My 1/8" rods have all been two piece for 45 years.

Never had an issue with a two piece rod.

Earl
__________________
Earl L. Cagle, Jr.
NAR# 29523
TRA# 962
SAM# 73
Owner/Producer
Point 39 Productions

Rocket-Brained Since 1970
Reply With Quote
  #6  
Old 04-07-2021, 11:17 AM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Michigan
Posts: 11,756
Default

I use 1-piece stainless steel rods in 1/8, 3/16, and 1/4".
Have never used those flimsy 2-piece aluminum things.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL
, if you have to ask what is "NORMAL" , you probably aren't

Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
Reply With Quote
  #7  
Old 04-07-2021, 12:00 PM
Scott_650 Scott_650 is offline
Craftsman
 
Join Date: Sep 2015
Posts: 479
Default

Single and two piece launch rods. Single piece 36” long for 3/16” rods, 48” long for a 1/4” rod and a 1/8” two piece rod. Someday I’ll probably have a rail - when I can pick one up rather than have it shipped...
Reply With Quote
  #8  
Old 04-07-2021, 12:18 PM
BEC's Avatar
BEC BEC is offline
Master Modeler
 
Join Date: Feb 2009
Location: Auburn, Washington
Posts: 3,144
Default

I generally use one-piece rods....back in my first rocketry period (1968-1974) I used 1/8 inch music wire from the hobby shop. I still have a couple of those. Today the 1/8 and 3/16 rods are stainless (3 foot 1/8 inch, 3 and 4 foot 3/16ths).

My current PVC tripod pads and three-pad rack are set up to carry launch rods in a case which uses two legs of the pad.

The two-piece rods (which haven’t been aluminum for a long time, GH) are usable but subject to easy bending at the roll pin joint. Carefully handled, they are certainly usable. If I was planning on using one I’d probably try to chamfer the socket end a little bit before assembling it so that the joint is as smooth as possible once assembled.

For PSII stuff I have a six foot steel 1/4 inch rod from the hardware store, which needs to be de-rusted before every use. I will probably cut it down to 4 1/2 or 5 feet now that TARC pretty much requires a rail. I do have a six foot 1010 rail pad as well. But all that stuff is beyond the “D and below” scope of the original question.
__________________
Bernard Cawley
NAR 89040 L1 - Life Member
SAM 0061
AMA 42160
KG7AIE
Reply With Quote
  #9  
Old 04-07-2021, 12:19 PM
BRS Hobbies BRS Hobbies is offline
Intermediate Rocketeer
 
Join Date: Jan 2009
Location: USA
Posts: 73
Default

A and B. Both options work fine.
__________________
www.BRSHobbies.com - Full line of model rocket products! Free shipping offer! No backorders or delays!
Reply With Quote
  #10  
Old 04-07-2021, 02:03 PM
LeeR's Avatar
LeeR LeeR is offline
Retired with Way Too Many Kits
 
Join Date: Jun 2007
Location: Colorado
Posts: 2,846
Default

I have switched most new builds of rockets that used 1/8” and 3/16” to MakerBeam 10mm rail. I have both 900mm and 1500mm lengths (roughly 36” and 60”). Larger, including most mid-power, I use 20mm rail from 8020 (1” rail is essentially 25mm rail, so 20mm is a bit smaller). My 20mm rail is 48”. I have used a friend’s 96” rail for my Super Orbital Transport. I get my micro and mini buttons from rail-buttons.com. The new minis have flathead screws that fit flush into a countersunk button recess.

Here is a picture showing MakerBeam and 20mm rail, with their micro and mini buttons. A 1/8” launch lug is in picture for comparison. Also shown is my Rockwell JawStand with 20mm rail. My longer MakerBeam rail is silver, which is better in hot, sunny conditions.

I have flown an Estes V-2 using micro buttons, but would normally use minis.
Attached Thumbnails
Click image for larger version

Name:  4FFF0CFD-4637-4F8A-BA68-A87261FACE0F.jpeg
Views: 29
Size:  1.15 MB  Click image for larger version

Name:  7D12F90A-6945-4586-BA9B-D56B5EF12460.jpeg
Views: 27
Size:  1.07 MB  
__________________
Lee Reep
NAR 55948

Projects: Semroc Saturn 1B, Super X-Ray
In the Paint Shop: Estes 1:100 Saturn 1B (old #2048 kit)
Last Completed: Estes V-2 (w/ scale enhancements)
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 09:48 PM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2021