Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Semroc > SVDT - Semroc Virtual Design Team
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 01-06-2007, 06:10 PM
Ltvscout's Avatar
Ltvscout Ltvscout is offline
Ye Olde Rocket Shoppe
 
Join Date: Jun 2004
Location: Milwaukee, WI
Posts: 5,542
Default Other Requests/Ideas

I'm starting this thread for requests/ideas other than motors or kits.

Something that would be nice to see is a parts assortment pack like they had in the good old days. The assortment pack from Estes nowadays is a joke with leftover parts in it. There are companies like Red Arrow, BMS, Apogee and Flis offering partial parts assortments, but nothing like the complete assortments that Centuri and Estes use to offer in the late 60's.
__________________
Scott D. Hansen
Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe!
Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies!
Ye Olde Rocket Forum
Ye Olde Rocket Auction
WOOSH NAR Section #558
Reply With Quote
  #2  
Old 01-06-2007, 06:15 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,355
Default

Quote:
Originally Posted by Ltvscout
I'm starting this thread for requests/ideas other than motors or kits.

Something that would be nice to see is a parts assortment pack like they had in the good old days. The assortment pack from Estes nowadays is a joke with leftover parts in it. There are companies like Red Arrow, BMS, Apogee and Flis offering partial parts assortments, but nothing like the complete assortments that Centuri and Estes use to offer in the late 60's.


Oh, thank you, Scott!

I've been going back to the old catalogs and just drooling longingly for some of those parts packages offered back then. What we need is a good "supply replenisher" box of usable tubes and balsa and rings and, well, STUFF that we really need...
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #3  
Old 01-06-2007, 06:19 PM
Ltvscout's Avatar
Ltvscout Ltvscout is offline
Ye Olde Rocket Shoppe
 
Join Date: Jun 2004
Location: Milwaukee, WI
Posts: 5,542
Default

Quote:
Originally Posted by CPMcGraw
Oh, thank you, Scott!

I've been going back to the old catalogs and just drooling longingly for some of those parts packages offered back then. What we need is a good "supply replenisher" box of usable tubes and balsa and rings and, well, STUFF that we really need...

I'm talking a complete set. Take a look at page 53 of the '69 Centuri catalog. The Experimenters Special had EVERYTHING you needed to make up to 8 rockets. Now that's an assortment!
__________________
Scott D. Hansen
Ye Olde Rocket Shoppe - Your One Stop BAR Shoppe!
Ye Olde Rocket Plans - OOP Rocket Plans From 38 Companies!
Ye Olde Rocket Forum
Ye Olde Rocket Auction
WOOSH NAR Section #558
Reply With Quote
  #4  
Old 01-06-2007, 06:42 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,355
Default

Quote:
Originally Posted by Ltvscout
I'm talking a complete set. Take a look at page 53 of the '69 Centuri catalog. The Experimenters Special had EVERYTHING you needed to make up to 8 rockets. Now that's an assortment!


Agreed!
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #5  
Old 01-06-2007, 07:26 PM
Carl@Semroc's Avatar
Carl@Semroc Carl@Semroc is offline
Junior ??? Rocketeer
 
Join Date: Mar 2005
Location: Knightdale, NC
Posts: 1,470
Default

OK. Which one first?
__________________
Carl McLawhorn
NAR#4717 L2
semroc.com
Reply With Quote
  #6  
Old 01-06-2007, 07:55 PM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,355
Default

Quote:
Originally Posted by Carl@Semroc
OK. Which one first?


If you mean "Which style -- Centuri or Estes?", then I'd have to say Centuri style, since there's a better cross-section of sizes.

If you mean "Which quantity of material in the package?", then I'd have to agree again with Scott; we need a comprehensive selection of components to make it interesting. I don't know which would be the better way to package tubes -- make them all 18", or a selection of long and short. Nose cones and other turned items, enough to build 8-10 basic models. Same with the other components like rings, launch lugs, motor hooks, parachutes, etc...

And we can't forget the printed materials, like fin patterns and shrouds, maybe even a complete plan of some simple design to get builders started.

It might be possible to feature two or three different "price range" kits, just like Estes and Centuri did in the late 60s. One set might have enough for 2-3 models, one might be able to do 3-5 models, the third as many as 8. I think folks would pay a premium for good quality components, but what they want is consistency.

Price points? How about $25, $40, and $75? What could these boxes be filled with for those prices? Close to what I described above? Better? Spot-on?

Maybe even put together at some point a $100 Super Box, equal to 2 or 3 times the $75-size box, considering that there would be a reduction in some of the printed material as a cost savings...
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #7  
Old 01-07-2007, 10:41 PM
James Pierson James Pierson is offline
Master Modeler
 
Join Date: Dec 2005
Location: Washington State
Posts: 654
Lightbulb Parts you say.

A better parts asortment would be great and a Futuristic Parts Assortment would be even better.

Also I would also like to see a Rocket Designing Kit. Not a parts assortment but a sample of all Semroc body tubes, center rings, fin material, various dowels, LL, and other parts.

*Body tube samples would be precut and about 1/2" long with several of each tube.
*Fin material sample would be of various thicknesses from 1/16" to 1/8".
I use such a Design Box myself and has really helped me figure out what tubes fit into each other in an eye appealing way. I lay several tubes on a flat surface and design via End View of the rocket design. I have come up with several design in this way including the Cargo Star Transport, Megga Dogfighter, Etc...


Parts:
I also would like a better way to attach a paper transition to a body tube. The narrow of the
transition is easy but the wider end onto an .05 CR really stinks . I would like to see some 1/4" thick Balsa Transition Centering Rings for some commomly used paper transitions. Half (1/8") of the ring would be used as a centering ring to center the two different BT's and the other half (1/8") would be tapered to match the slope of the paper transition. A designer could even customize the slope themself with a little sanding if an oddball transition is desired.


James Pierson
NAR# 77907
Reply With Quote
  #8  
Old 01-08-2007, 12:02 AM
CPMcGraw's Avatar
CPMcGraw CPMcGraw is offline
BARCLONE Rocketry
 
Join Date: Mar 2005
Location: Mobile, Alabama
Posts: 5,355
Default

Quote:
Originally Posted by James Pierson
Parts:
I also would like a better way to attach a paper transition to a body tube. The narrow of the
transition is easy but the wider end onto an .05 CR really stinks . I would like to see some 1/4" thick Balsa Transition Centering Rings for some commomly used paper transitions. Half (1/8") of the ring would be used as a centering ring to center the two different BT's and the other half (1/8") would be tapered to match the slope of the paper transition. A designer could even customize the slope themself with a little sanding if an oddball transition is desired.


James,

Carl has demonstrated this to be possible with paper rings using the laser Krellvenator and his 0.05" paper stock. Look at the base ring on the Apollo capsule. It's a staggered cut. For a ring like you're describing, a glue-up of two rings - one tapered, one not - would work fine. If the paper stock were available in thicker sheets - up to 1/4" (or 5x the 0.05" material, for 0.25" thick) - your ring could be done the same way.
__________________
Craig McGraw

BARCLONE Rocketry -- http://barclone.rocketshoppe.com
BARCLONE Blogsite -- http://barclone.wordpress.com
BARCLONE Forum -- BARCLONE Forum

BARs helping BARs

SAM 0044
AMA 352635
Reply With Quote
  #9  
Old 01-08-2007, 10:10 PM
rocket_james rocket_james is offline
Ye Olde Rocketeer
 
Join Date: Jan 2007
Location: DFW Area, Texas
Posts: 58
Default

Quote:
Originally Posted by Ltvscout
I'm starting this thread for requests/ideas other than motors or kits.

Something that would be nice to see is a parts assortment pack like they had in the good old days. The assortment pack from Estes nowadays is a joke with leftover parts in it. There are companies like Red Arrow, BMS, Apogee and Flis offering partial parts assortments, but nothing like the complete assortments that Centuri and Estes use to offer in the late 60's.

My personal preference on those is to have larger packs of single items, rather than packs of varied items. I always end up with stuff that I just use up on something just to use it up. I also prefer the larger 34" tubes, rather than 18" tubes. Getting rid of the spirals is a good thing, too! Who likes filling spirals. Can't we just get rid of them? I got a couple of boxes of 34" tubes (BT-5 thru BT-60, 12 of each per box) from a guy on eBay and the spirals are almost non-existent. That's my idea of a parts pack! Having a variety of bulk packs like that would be great. A variety pack for cones would be cool, though, especially one that included futuristic cones like the Estes Futuristic Parts Assortment.
My 2 cents.
James
Reply With Quote
  #10  
Old 01-12-2007, 11:09 AM
foose4string foose4string is offline
Master Modeler
 
Join Date: Jan 2007
Posts: 1,019
Default

Good idea Scott. There are some parts I don't mind making from scratch, tubes and cones are what is most important to me, the rest I can usually fabricate myself in a pinch. Only problem with including cones, is your stuck using what you have rather than what you really want. Tube assortments are a good place to start.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 03:32 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe 1998-2019