Ye Olde Rocket Forum

Go Back   Ye Olde Rocket Forum > Work Bench > Projects
User Name
Password
Auctions Register FAQ Members List Calendar Today's Posts Search Mark Forums Read


Reply
 
Thread Tools Search this Thread Display Modes
  #61  
Old 08-15-2022, 02:15 PM
BEC's Avatar
BEC BEC is online now
Master Modeler
 
Join Date: Feb 2009
Location: Auburn, Washington
Posts: 3,291
Default

I just want to put in a shout-out here to John Boren (AKA JumpJet on here) for the clever jigs and tools, as well as the quality of the interlocking parts on the S-O-T. I'm almost done with the structural build of one, doing it almost exactly stock (even while following both jeffyjeep's and hcmbanjo's builds). Everything fits together properly, and all the little handy jigs and tools have indeed been very helpful.

Well done John!

(And to all the folks downstream of his design work that had to turn his designs into parts and then get those into our hands.)
__________________
Bernard Cawley
NAR 89040 L1 - Life Member
SAM 0061
AMA 42160
KG7AIE
Reply With Quote
  #62  
Old 08-16-2022, 01:44 PM
LeeR's Avatar
LeeR LeeR is offline
Retired with Way Too Many Kits
 
Join Date: Jun 2007
Location: Colorado
Posts: 2,998
Default

Quote:
Originally Posted by ghrocketman
Took almost two weeks to get a set of 1/70 Saturn 1B decals.
Decals were 100% top-notch great, just did not expect them to take that long.


Glad to hear the quality is top notch. Every decal set I ever got from the former owner, Tom Prestia, we’re very high quality.
__________________
Lee Reep
NAR 55948

Projects: Semroc Saturn 1B, EAC Firecat (Mini HoJo bash), Estes Maxi Honest John
In the Paint Shop: Estes 1:100 Saturn 1B (old #2048 kit)
Launch-Ready: Farside-X, Cirrus (scratch 29mm min. dia.), Bertha and Betty (inseparable sisters)
Reply With Quote
  #63  
Old 08-16-2022, 02:21 PM
ghrocketman's Avatar
ghrocketman ghrocketman is offline
President, MAYHEM AGITATORS, Inc.
 
Join Date: Jul 2005
Location: Nunya Bizznuss, Michigan
Posts: 12,598
Default

They were worth the wait, just did not expect it to be that long.
If you are in a rush, may want to contact them before ordering.
__________________
When in doubt, WHACK the GAS and DITCH the brake !!!

Yes, there is such a thing as NORMAL
, if you have to ask what is "NORMAL" , you probably aren't !

Failure may not be an OPTION, but it is ALWAYS a POSSIBILITY.
Reply With Quote
  #64  
Old 08-16-2022, 10:29 PM
Bill's Avatar
Bill Bill is offline
I do not like Facebook
 
Join Date: Sep 2008
Location: North Tejas
Posts: 2,701
Default

Quote:
Originally Posted by LeeR
I did use a 29mm motor tube. A bit heavy, and I suppose I could have peeled out a layer, but performance was fine. I did the trade off that I wanted it scale, chose the 29mm tube, and did not worry about it not being the ultimate glider.

I have a lathe so I turned a “B” profile nose cone for the orbiter. The transporter’s nose cone is a BNC-60Y from Semroc.


Thanks.

I'll have to find out what the diameter of this tube is:

https://www.apogeerockets.com/Garag...Path=42_43_259&

Two pieces will have to be joined with a coupler to get the needed 10.86" length. The position of the coupler can be determined to help reduce added trimming weight.

I have access to lathes now and will have to learn how to turn cones.

The ultimate dream is to eventually build an automated cone making machine - just specify a classic cone, say a BNC-20B, along with the desired size. It will return with the size of the raw stock to use and automagically turn it. The SEMROC custom Cone Maker feature had promised to do that, but it is likely gone permanently.


Bill
__________________
It is well past time to Drill, Baby, Drill!

If your June, July, August and September was like this, you might just hate summer too...

Please unload your question before you ask it unless you have a concealed harry permit.

: countdown begin cr dup . 1- ?dup 0= until cr ." Launch!" cr ;

Give a man a rocket and he will fly for a day; teach him to build and he will spend the rest of his days sanding...
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump



All times are GMT -5. The time now is 02:31 AM.


Powered by: vBulletin Version 3.0.7
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Ye Olde Rocket Shoppe © 1998-2022