#1
|
||||
|
||||
New Design -- 1.37X Centuri Micron
This ST-7 to ST-10 upscale works just fine... on *one* motor. *If* it's 13mm.
I wrestled with all the usual 18mm motor suspects, but only the 1/2A6-2 gave me relatively gentle deployment velocities. (Color me "*not* a happy camper." ) Please note the extra large (that's "muy grande") SE-14 screw eye, which you will no doubt recognize from Semroc's "Tau Zero" kit. I trotted it out again here, and it seems to do the job. As you were. .
__________________
Jay Goemmer "Centuri Guy"/"Tau Zero" YORF Member 28 Semroc SAM #0029 NAR 86131 "I think about organizing things all the time. Never seems to happen. I find something that piques my interest and I'm off on a quest. Or a Centuri. " --Bill Eichelberger, 02/22/2022 “Centuri fret buzz in an updated form.” Bill “Wallyum” Eichelberger re: Estes Flutter-By 03 Sept 2014 |
Thread Tools | Search this Thread |
Display Modes | |
|
|