|
#1
|
||||
|
||||
Apollo SM RCS units.
Does anybody have a true color photo or diagram of the RCS nozzle quads on the Apollo Service Module? I’m pretty sure they’re not suppose to be just plain white.
Thanks!
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 |
#2
|
|||
|
|||
Looks like it's all silver (Apollo 15).
|
#3
|
||||
|
||||
All of the RCS motors were test fired after manufacture. I took this picture at NARCON last year in Houston. They are sort of goldish and silver. One recommendation that I heard was a burnt platinum. I would not go straight white or silver.
Chas
__________________
Charles Russell, MSgt,USAF (ret.) NAR 9790, Lvl 1 SAM "Balls Three" |
#4
|
||||
|
||||
Chas beat me to it, with a better picture than the one I would have put up (but taken of the same vehicle - the full Saturn V that is on display at Space Center Houston). The nozzles look to me as if they are either titanium or stainless steel discolored by heat. Based on Chas' picture I am leaning toward the latter.
__________________
Bernard Cawley NAR 89040 L1 - Life Member SAM 0061 AMA 42160 KG7AIE |
#5
|
||||
|
||||
The ones I have photographed at KSC and NASM (in D.C.) have had silver quad 'boxes' like this one (my photos are not immedialtely accessable).
As can be seen, there is printing on the top of the box, which I forget the exact nature but seems to deal with quad firing order or something similar. Here's a link to the photo: https://upload.wikimedia.org/wikipe...lo_RCS_quad.jpg Earl
__________________
Earl L. Cagle, Jr. NAR# 29523 TRA# 962 SAM# 73 Owner/Producer Point 39 Productions Rocket-Brained Since 1970 |
#6
|
|||
|
|||
Quote:
the nozzles look like they are constructed of a Cadmium and Nickel Alloy. Cadmium gives off that Yellow / pink hue. my guess would be that these motors are probable Hypergolic.
__________________
Neal Miller Master Blaster NAR# 58296 |
#7
|
||||
|
||||
Those thruster nozzles are related to our hobby. Back in the mid to late 90's, some friends down in Huntsville decided to do an amateur high altitude project. It was a rockoon (balloon launched rocket). My buddy Jim built the motor hardware and we cast a few propellant grains for the hybrid. However, they wanted it to be a "dirt rocket". I.E. use tar for the propellant grain. Jim's grains were more potent, but the tar was just something they wanted to use because somebody said it wouldn't work. We did test firings at Tim Pickens' (eventual designer of Spaceship One motor) parents' land. The rocket was successfully tested via a ground launch in Manchester, TN that used every bit of the 15k waiver. The balloon was eventually launched off a barge in the Gulf and the rocket made a successful flight, but I don't recall the altitude. It was in Guinness as the highest amateur flight for a few years.
Now to relate it to the space program's reaction control thrusters. A lot of old hardware from NASA ended up in a couple of junkyards in Huntsville. Tim found some of them and used an expansion bell from one to make a mold for the dirt rocket's high altitude motor. The more I think about it, I'm pretty sure it was from Surveyor instead of Apollo, but it's still cool as heck. Maybe Tim, Dan or one of the old crew is lurking and can remember it better than me.
__________________
I love sanding. |
#8
|
||||
|
||||
Quote:
The World War II-era Private A and/or Private F used asphalt-fueled composite solid propellant. It worked well, but got very soft at tropical/desert temperatures and cracked at very cold temperatures; tar, I imagine, is more physically stable over such a temperature range.
__________________
Black Shire--Draft horse in human form, model rocketeer, occasional mystic, and writer, see: http://www.lulu.com/content/paperba...an-form/8075185 http://www.lulu.com/product/cd/what...of-2%29/6122050 http://www.lulu.com/product/cd/what...of-2%29/6126511 All of my book proceeds go to the Northcote Heavy Horse Centre www.northcotehorses.com. NAR #54895 SR |
#9
|
||||
|
||||
Hey Jeff!
Yeah, basically the quad "boxes" are white, and the nozzles are sort of a "gunmetal" color... Actually, "gunmetal" isn't quite right... they sorta have a slightly "gold" color to them, or "brass" color maybe. I got curious in the middle of digging these up and searched for it and found the Apollo operations handbook on PDF and here's what it actually says about the thruster quad construction materials... "Combustion chamber- The combustion chamber is constructed of unalloyed molybdenum which is coated with molybdenum disilicide to prevent oxidation of the base metal. Cooling of the chamber is by radiation and film cooling. Nozzle extension- The nozzle extension is attached to the chamber with a waspalloy nut. The nozzle extension is machined from a cobalt base alloy (stainless steel). The stiffener rings are machined." Here's some pics of the CSM display at Kennedy Space Center, below the Saturn V, and of the Saturn V itself. I'll see what I have regarding the CSM on the Saturn V in Huntsville and of course the one here in Houston as well... Later! OL J R
__________________
The X-87B Cruise Basselope-- THE Ultimate Weapon in the arsenal of Homeland Security and only $52 million per round! |
#10
|
||||
|
||||
Quote:
Take a look at the photo link in my prior message and a second look at your photos (I have similar photos of those same RCS quads at KSC myself). The quad *boxes* themselves are silver...that 'top of the box' white you see is the 'printing' I mentioned above. I think it might actually be a label applied to the top of the quad box. Earl
__________________
Earl L. Cagle, Jr. NAR# 29523 TRA# 962 SAM# 73 Owner/Producer Point 39 Productions Rocket-Brained Since 1970 |
Thread Tools | Search this Thread |
Display Modes | |
|
|