|
|
Thread Tools | Search this Thread | Display Modes |
#1
|
||||
|
||||
Build Thread: Boyce Aerospace Pershing 1A builder's kit
I thought I'd start anew on this thread now that I have everything for the build.
The 3D printed parts from BAH are exceptional!--they're much smoother than the parts that BAH provided for the Nike Ajax builder's kit. "The Vixen" has graciously volunteered to sand the 3D printed plastic parts while I'm in Nashville, TN this week on a job. The 29 mm engine mount tube is from LOC and the BT-101 I've had laying around for so long that I don't even remember why I happen to have it. I've cut the engine mount tube down to 8" and after measuring the BT-101 and marking it I've cut it to 21.467" TBC
__________________
Never trust an atom. They make up everything. 4 out of 3 people struggle with math. Chemically, alcohol IS a solution. NAR# 94042 SAM# 0078 Last edited by jeffyjeep : 02-28-2021 at 09:45 PM. Reason: Punctuation. I can't help it, both of my parents were teachers. |
Thread Tools | Search this Thread |
Display Modes | |
|
|