11-12-2006, 12:35 PM
|
|
German Model Rocket Builder
|
|
Join Date: Sep 2005
Location: Germany
Posts: 1,313
|
|
Ok, first off I cut the shroud under the black lines and then placed it over the shoulder again. As you can see it didn't help very much. I dare not cut any more away from the shroud.
As you can see in the picture the "overlap" is still visible. I would need to remove 1.5mm from the balsa shoulder.
I curious to know what dimensions other have on their nose cone.
Mine is 32.65mm:
I have the feeling my nose cone turned out too big
|