Quote:
Originally Posted by johnnwwa
Hey James
Another great design such coolness.
Remember that 13mm tube fin rocket you gave Conner at our last launch well . we cut down the streamer a tad loaded up a A3-4 and this thing scoots would you please post a sims photo/drawing, parts list SEMROC parts of course or pm me. I'd like to build one or possible upscale to a 18mm ABC.
Thanks
John
Also posted our OPROC club launch site on Google Earth.
|
Here it is John
. I called it the Crazy Bee and it is just an small 13mm design that I put
together with some scrap parts. I had to rework the file quite a bit because Rocksim is still
quite inaccurate when it calculates drag for both Tube fins and Ring fins. I am glad that the
test flight went well for you and Conner. We'll turn Conner into an Mad Rocket Scientist/Designer yet
.
This design does have some custom parts to it unfortunately. I designed it before I began to design rockets from off the shelf parts
. You will have to cut the (2) 1/2 inch long rings fins from the ST-1620.
PS. John, I will try to work on an upscale soon, JP.
Crazy Bee II Parts List
Nose Cone.............1-Qty.......BC-524
Main BT..................1-Qty.......ST-5120
Thrust Block.........1-Qty.......TB-5
Eye Screw.............1-Qty.......SE-10
Shock Cord...........1-Qty.......EC-112
Tube Fin.................3-Qty.......ST-590
Ring Fin..................1-Qty.......ST-1620.....cut into (2 Qty.) 1/2 inch lengths.
Enjoy and Thanks Again, JP
James Pierson
NAR# 77907
Crazy Bee II (13mm)
Launch guide length: 36.0000 In
MOTOR.................MAX. ALTITUDE...........DEP. VELOCITY
1/4A3T-3..............130.61647 Ft.............13.8283 ft/s
1/2A3T-4..............301.22179 Ft.............13.2720 ft/s
A3T-4.................605.50853 Ft.............10.8764 ft/s
.