04-07-2021, 02:03 PM
|
|
Retired with Way Too Many Kits
|
|
Join Date: Jun 2007
Location: Colorado
Posts: 3,223
|
|
I have switched most new builds of rockets that used 1/8” and 3/16” to MakerBeam 10mm rail. I have both 900mm and 1500mm lengths (roughly 36” and 60”). Larger, including most mid-power, I use 20mm rail from 8020 (1” rail is essentially 25mm rail, so 20mm is a bit smaller). My 20mm rail is 48”. I have used a friend’s 96” rail for my Super Orbital Transport. I get my micro and mini buttons from rail-buttons.com. The new minis have flathead screws that fit flush into a countersunk button recess.
Here is a picture showing MakerBeam and 20mm rail, with their micro and mini buttons. A 1/8” launch lug is in picture for comparison. Also shown is my Rockwell JawStand with 20mm rail. My longer MakerBeam rail is silver, which is better in hot, sunny conditions.
I have flown an Estes V-2 using micro buttons, but would normally use minis.
__________________
Lee Reep
NAR 55948
Projects: Semroc Saturn 1B, Ken Foss Designs Mini Satellite Interceptor
In the Paint Shop: Nothing! Too cold!
Launch-Ready: Farside-X, Maxi Honest John, Super Scamp
|