Ye Olde Rocket Forum - View Single Post - Thrustline Aerospace F-24 Panther Plans

Scott,

Attached below is the data for the Thrustline Aerospace F24 Panther from the RockSim file:

TLA F24 Panther Parts

Nose cone Estes - Estes - PNC-55AC, Material: Polystyrene PS Nose shape: Hollow Ogive, Len: 5.4030 In., Dia: 1.3250 In. Wall thickness: 0.1250 In. Body insert: OD: 1.2000 In., Len: 0.5000 In.

Body tube Estes - EST 3087 - BT-55, Material: Paper OD: 1.3250 In. , ID: 1.2830 In. , Len: 17.0000 In.

Custom Fin set - 2 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
122.845480638039, 0.
105.489495692046, 69.3311937212273
107.417938463822, 136.344580040478
72.2238578788929, 145.986793899362
0., 0.

Custom Fin set - 2 fins Custom, Material: Balsa (0.125" thick) Radial angle 0 degrees
Point List in mm :
64.5050191406548, 0.
65.5206576016314, 16.7700114747567
74.2805393275543, 56.3799114528424
41.9070633839265, 67.1710701007184
0., 0.

Custom Fin set - 1 fin Custom, Material: Balsa (0.125" thick) Radial angle 90 degrees
Point List in mm :
221.27572716166, 0.
247.843311604138, 53.4508067986595
223.741368416202, 53.0803183585653
186.996140874188, 21.253743322175
0., 0.

Body tube Estes - EST 3085 - BT-20, Material: Paper OD: 0.7360 In. , ID: 0.7100 In. , Len: 2.7500 In. Location: 14.2500 In. From the front of Body tube

Engine block Estes - 30162-2 - Eng. block BT-20, Material: Paper Engine blockOD: 0.7100 In., Hole #1: : 16.5300 In. Len: 0.1969 In. Location: 0.0000 In. From the front of Body tube

Parachute - Custom, Material: Mylar 1 parachute, Shape: 6 sided Dia: 14.9098 In., Spill hole: 0.0000 In.

Engine hook Estes - Engine hook - Standard size, Material: Mass: 0.0494 Oz.

eyelet - Custom, Material: Mass: 0.0100 Oz.

Mass object - Custom, Material: Mass: 0.3000 Oz.

Custom Fin set - 1 fin Custom, Material: Balsa (0.125" thick) Radial angle -45 degrees
Point List in mm :
101.335488226224, 0.
114.749256876695, 31.8222817896545
101.315997545064, 31.8222817896545
0., 0.

Launch lug Apogee - "1/8"" X 1" - , Material: Paper OD: 0.1720 In., ID: 0.1560 In., Len: 0.5000 In., Loc: 7.3750 In.

Launch lug Apogee - "1/8"" X 1" - , Material: Paper OD: 0.1720 In., ID: 0.1560 In., Len: 0.5000 In., Loc: 14.2500 In.

Custom Fin set - 1 fin Custom, Material: Balsa (0.125" thick) Radial angle -135 degrees
Point List in mm :
101.335489563852, 0.
114.749258391385, 31.8222822097086
101.315998882435, 31.8222822097086
0., 0.