01-02-2016, 12:10 AM
|
|
Old Submariner
|
|
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,782
|
|
Now to use the plastic-backed basswood.
Using a piece of 1/2" angle aluminum as a fence, I cut the strip into (8) 1/2" blocks with a razor saw.
I then use the Corian sanding slab to make the bottom end very flat and I then scrape a bevel into the bottom edge to clear the fillet inside base ring.
Using mid-cure epoxy (15 minute) I mount the (8) blocks using the pencil lines as guides.
Time for a Scotch and an IPA. Good night. TBC
__________________
Never trust an atom. They make up everything.
4 out of 3 people struggle with math.
Chemically, alcohol IS a solution.
NAR# 94042
SAM# 0078
|