Photo shows inside of fuselage shell, parachute cavity. Notice the glue tabs have been cut with a straight line instead of angled like on the cones?

You will need to glue them together with a small drop of glue and then bending inward at about a 45degree angle. Light washed out the photo showing the glue operation, but I think you can see the process. Start at the glue seam and rotate and bend/glue each tab on top of the previous tab. Only rotate rocket in one direction. Once the are glued except for the last one, it will be glued to the top of both tabs to the right/left.

Rocket is now done except for installing the engine mount and parachutes shock cord and launch lugs.

Attached Thumbnails