12-29-2019, 11:44 AM
|
|
Old Submariner
|
|
Join Date: Jan 2009
Location: Home of Wayne & Garth
Posts: 7,781
|
|
Thanks for the compliments!
I now finish ALL balsa fins the same way:
(1) coat of diluted Elmer's Wood Filler, then sand smooth with 220.
(1) coat of Deluxe Materials Sand'n'Seal, then sand smooth with 320.
--another coat of Deluxe Materials Sand'n'Seal, then sand smooth with 320.
--another coat of Deluxe Materials Sand'n'Seal, then sand smooth with 320.
--a final coat of Deluxe Materials Sand'n'Seal, then sand smooth with 400.
I have never, ever, finished fins before assembling them to the model. Of course, some are harder to sand than others. The Sasha I was able to sand all of then myself, but on a more "crowded" build (like the Starlight I'm working on) I'll enlist the smaller and more nimble fingers of "The Vixen".
__________________
Never trust an atom. They make up everything.
4 out of 3 people struggle with math.
Chemically, alcohol IS a solution.
NAR# 94042
SAM# 0078
|